Method for measuring the diameter of a cone by an inner diameter dial gauge
2024-05-28 10:06:33
The plug gauge is a commonly used gauge for measuring the diameter of a taper hole. However, in actual use, the size of the taper hole to be measured is different due to the different force, and the larger the diameter of the taper hole, the more prominent the problem. In order to solve this problem, we use a plug gauge to check the taper for the taper hole in the range of 50-250mm, and then use the inner diameter to replace the plug gauge to measure the taper hole diameter, and the effect is good. The advantage of this method is: measuring the cone
Pvc Mooulding Capping,Building Moulding Capping,Plastic Moulding Capping,4.5Mm Building Moulding Capping
TAISHAN CITY WANAN CABLE CO.,LTD , https://www.tswanan.com