Unattended remote solar monitoring system
Solar Monitoring System Introduction The solar monitoring and power supply system is composed of a solar battery, a solar charge and discharge controller, and a solar battery (group). If the load power supply is AC 220V or 110V or a variety of voltages, you also need to configure the inverter.
The function of each part of the solar energy monitoring system is:
(1) Solar panels: Solar panels are a core part of solar power systems and the highest value in solar power systems. Its role is to convert the sun's radiant power into electrical energy, or send it to a storage battery, or push a load to work.
(2) Solar controller: The function of the solar controller is to control the working status of the entire system and play the role of overcharge protection and over-discharge protection of the battery. In areas with large temperature differences, qualified controllers should also have temperature compensation. In a solar street light system, a solar street light controller with light control and time control functions is required;
(3) Storage batteries: Valve-controlled, maintenance-free lead-acid batteries are generally used. In areas with small-scale micro-systems and cold weather, solar colloidal batteries need to be configured, which can be used at low temperatures, and the efficiency is not greatly affected. Its role is to store the electric energy emitted by the solar panel when there is light, and release it when needed.
(4) Inverter: Two kinds of square wave and sine wave, the direct output of solar energy is generally 12VDC, 24VDC, 48VDC. In order to supply electric energy to 220VAC electric appliances, it is necessary to convert the DC electric energy generated by the solar power generation system into AC electric energy. Therefore, it is necessary to use a DC-AC inverter.
The putting into operation of this system will transform traditional forest fire prevention management into modern forest fire prevention information management. The surveillance cameras can be rotated 360 degrees and tracked up and down. All-around real-time monitoring of forest key areas is conducted in real time, and forest fires are intelligently identified and alarmed. In addition, the camera also has automatic analysis and satellite transmission information function, special monitoring probes visible daytime radius of 5 kilometers, 3 kilometers at night, any forest fire system can be captured in the first time and real-time feedback to the monitoring room . Relying on the advantages of the 4G network, the staff can monitor the conditions near the forest farm in real time through the mobile phone.
Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.
Hospitals
Airports
Retail centers
Pharmacies
Hotels
Grocery stores
Hardware stores
Sporting goods stores
And more
In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.
Hongfa will only dispatch highly trained CE Certified inspector/technicians to inspect, repair, service or replace automatic doors. This ensures we provide the most efficient and safest door repair for your business.
Automatic Sliding Door,Automatic Sliding Glass Door,Sliding Door With Automatic System,Automatic Stacking Sliding Glass Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com