Maintenance of cutting machine Dongguan Houjie Heavy Machinery Co., Ltd.
First, the cutting machine maintenance points:
note:
1. The cutting machine platform should be wiped clean frequently, and the lubricating oil should not be touched to avoid the cutting matter and affect the appearance of the finished product.
2, the cutting board can not be left with debris, or contaminated with oil, it is best to clean every day to keep it clean.
3, add lubricants should be careful not to touch other parts, if it must be wiped clean.
4. After using the cutting machine, be sure to clean the surroundings to keep the machine clean.
Second, maintenance methods:
1. When using the machine, pay attention to whether the oil in the oil pot still has a display. If it is not displayed, it means there is no lubricating oil. Please add the lubricating oil.
2. When the lubricating oil is sent to the four sliding shafts, just swing the handles back and forth.
3. It is recommended to use “R-68#†circulating oil for circulating oil. The circulating oil should be used for half a year, and new circulating oil must be replaced. Change it once a year.
4. Start after long-term shutdown → lubricate four sliding shafts.
Dongguan Houjie Heavy Machinery Co., Ltd. specializes in the production and sales of rocker type cutting machine, precision four-column hydraulic cutting machine, bilateral automatic feeding cutting machine, hydraulic cutting machine, plane cutting machine, precision four-colum cutting machine, automatic cutting machine and other cutting Cutting equipment, please contact us!
Source of information: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Sealand is a trustworthy manufacturer of CNG Mass Flow Meter, CNG Mass Flowmeter, CNG Flow Meter, CNG Flowmeter, CNG Coriolis Meter, ATEX, IECEx & CE approved.
With its high accuracy, wide rangeability and reliable performance, Sealand meter has been applied in many kinds of industries during the last 8 years. Unlike others who only focus on the measurement of liquid at normal pressure & temperature, Sealand has conquered the difficulty in the measurement under severe conditions, such as high pressure, high viscosity, high & low temperature.
Take CNG (compressed natural gas) for example. As the saying goes, the meter can measure anything else if it can measure CNG. It is quite hard to measure gas under high pressure. The sensor must be able to bear high pressure; in this way, the thickness of flow tube must be increased, so the transmitter shall be more sensitive to detect the signal; however, Sealand made it. Sealand's first model is specially designed for CNG dispenser, and now thousands of this model are put into use on the market.
CNG Mass Flow Meter, CNG Mass Flowmeter, CNG Flow Meter, CNG Flowmeter, CNG Coriolis Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com