How to maintain the laundry equipment regularly
2023-04-27 04:11:48
Fully enclosed dry cleaning machine maintenance procedures
1. Check maintenance before starting every day.
2. Periodic maintenance and maintenance as planned. Divided into weekly maintenance, monthly maintenance, semi-annual maintenance, annual maintenance
First, check the following aspects of the machine before starting the machine.
1. The filter pressure gauge shows whether it is below 0.1Mpa;
2. Is there any loose screw on the main unit;
3. Whether the pipelines, valves, and observation windows have run, run, drip, and leak;
4. Equipment appearance hygiene inspection;
5. Check the distillation tank, button collector, cilia filter, oil water separator, etc.
Secondly, boot observation:
1. Turn on the power switch and check if the various displays are normal.
2. Open the cooling water valve.
3. Turn on the air compressor, wait for the pressure to reach the specified value of 0.7Mpa, and then start the machine to work.
Finally at the end of the work:
1. After the last laundry cycle on the working day, confirm that the dry cleaning agent in the distiller has been distilled.
2. Turn off the power switch and the water inlet valve.
3. At the end of the final work, close all switching valves.
Weekly maintenance
1. The water separator should be cleaned once a week, and all the debris in the water separator should be wiped clean with cotton thread. Then resume its working state.
2. The compressed air filter is cleaned once a week. The filter core is brushed with a soft brush and the plexiglass cover is cleaned with water and wiped dry.
3. The glass of each observation hole should be wiped once a week.
4. Inspect the seals of the various parts such as the loading door, the distillation box, the fluff filter, and the button collector for damage.
Monthly maintenance
1. Add a new oil to the grease cup every month. (according to the instructions of the oil quality)
2. Check the oil level of the compressed air oiler and add it if necessary. (according to the oil number of the instruction manual)
3. The compressed air hose connector should be inspected once a month and tightened if necessary.
4. Clean the water inlet filter
5. Clean the steam filter (only for steam type machines)
6. Check the machine anchor bolts and tighten.
7. Check belt tightness
Every six months of maintenance
1. Clean the solvent tank and clean it once a year with other bottom boxes.
2. Clean the fluff on the drying condenser.
3. Clear the reason to distill the condenser to the pipe of the water separator.
4. Check all electrical wiring for looseness.
Annual maintenance
1. All motor bearings are updated with grease.
2 Clean the tubing from the distiller to the condenser.
3 clean the converter of the refrigeration unit
4 cleaning and drying heater
5 clean the condenser
Maintenance methods for each component
The button collector button is equipped with a pneumatic door lock on the door of the collector. When the machine is working, the door is locked. The button collector door can be opened only after the simple door open button is pressed. The button collector door is equipped with a safety switch. When the door is opened, the computer alarms and the machine is self-locking and cannot work.
The button collector door can be opened only when the machine stops working and the button is opened by the cylinder door. It is strictly prohibited to violate the safety operation rules.
maintain
When the machine is used on average about 5 times, the button collection basket must be cleaned up. The specific operation methods are as follows:
1. When the machine stops working, press the OPEN DOOR button on the computer board to open the button collector door.
2. Remove any residue and hard objects left in the dry cleaning process in the button collector.
3. Close the button collector door after cleaning.
Ciliary collector
The ciliary collector is located at the rear of the air duct at the top of the machine. It collects the cilia that is detached from the clothes during dry cleaning, thereby preventing clogging into the refrigeration coil.
The first door can be opened by pressing the door button to open the simplified door. When the machine is running, the ciliary collector must be completely closed or the machine will stop working.
The ciliary collector is equipped with a ciliary collection bag, which should be cleaned regularly to avoid affecting the smooth flow of the circulating air.
Clean up:
1 Clean the cilia in the ciliated bag every 3-4 times.
2 Clean the cilia on the second ciliary basket every day.
3 Unscrew the 1st and 2nd fluff baskets every half month, and gently attach the cilia attached to the cartridge with a hard brush.
4 Clean the cilia collection bag once a month with water. When the collection bag is completely dry, it can be used again.
Automatic drying controller
The automatic drying system can automatically adjust the length of drying time according to the type of clothes and the amount of loading. If the load of the underwear is small, it will automatically shorten the drying time of the clothes and automatically control the washing time. Drying time.
The working principle is as follows: During the drying process, the solvent in the clothes flows into the automatic dryer to form a certain liquid level, so that the float floats. When the clothes are dried, the liquid level in the automatic dryer drops, the float is automatically disconnected, and after the computer receives the signal, it automatically transfers to the next automatic program.
In order to prevent dirt from blocking the outlet of the automatic dryer, it must be cleaned weekly. The specific cleaning is as follows:
Loosen the bottom thread, clean the filter and clean the holes if necessary
1 wash once a week 30-40 times or so
2 Unscrew the lower part of the tube and unscrew the bottom thread.
3 Take out the strainer and wash the cilia on the net.
4 put back in the upper and lower size, with the big head facing up.
5 Screw on the screw.
The article comes from Buddha dump: http://
1. Check maintenance before starting every day.
2. Periodic maintenance and maintenance as planned. Divided into weekly maintenance, monthly maintenance, semi-annual maintenance, annual maintenance
First, check the following aspects of the machine before starting the machine.
1. The filter pressure gauge shows whether it is below 0.1Mpa;
2. Is there any loose screw on the main unit;
3. Whether the pipelines, valves, and observation windows have run, run, drip, and leak;
4. Equipment appearance hygiene inspection;
5. Check the distillation tank, button collector, cilia filter, oil water separator, etc.
Secondly, boot observation:
1. Turn on the power switch and check if the various displays are normal.
2. Open the cooling water valve.
3. Turn on the air compressor, wait for the pressure to reach the specified value of 0.7Mpa, and then start the machine to work.
Finally at the end of the work:
1. After the last laundry cycle on the working day, confirm that the dry cleaning agent in the distiller has been distilled.
2. Turn off the power switch and the water inlet valve.
3. At the end of the final work, close all switching valves.
Weekly maintenance
1. The water separator should be cleaned once a week, and all the debris in the water separator should be wiped clean with cotton thread. Then resume its working state.
2. The compressed air filter is cleaned once a week. The filter core is brushed with a soft brush and the plexiglass cover is cleaned with water and wiped dry.
3. The glass of each observation hole should be wiped once a week.
4. Inspect the seals of the various parts such as the loading door, the distillation box, the fluff filter, and the button collector for damage.
Monthly maintenance
1. Add a new oil to the grease cup every month. (according to the instructions of the oil quality)
2. Check the oil level of the compressed air oiler and add it if necessary. (according to the oil number of the instruction manual)
3. The compressed air hose connector should be inspected once a month and tightened if necessary.
4. Clean the water inlet filter
5. Clean the steam filter (only for steam type machines)
6. Check the machine anchor bolts and tighten.
7. Check belt tightness
Every six months of maintenance
1. Clean the solvent tank and clean it once a year with other bottom boxes.
2. Clean the fluff on the drying condenser.
3. Clear the reason to distill the condenser to the pipe of the water separator.
4. Check all electrical wiring for looseness.
Annual maintenance
1. All motor bearings are updated with grease.
2 Clean the tubing from the distiller to the condenser.
3 clean the converter of the refrigeration unit
4 cleaning and drying heater
5 clean the condenser
Maintenance methods for each component
The button collector button is equipped with a pneumatic door lock on the door of the collector. When the machine is working, the door is locked. The button collector door can be opened only after the simple door open button is pressed. The button collector door is equipped with a safety switch. When the door is opened, the computer alarms and the machine is self-locking and cannot work.
The button collector door can be opened only when the machine stops working and the button is opened by the cylinder door. It is strictly prohibited to violate the safety operation rules.
maintain
When the machine is used on average about 5 times, the button collection basket must be cleaned up. The specific operation methods are as follows:
1. When the machine stops working, press the OPEN DOOR button on the computer board to open the button collector door.
2. Remove any residue and hard objects left in the dry cleaning process in the button collector.
3. Close the button collector door after cleaning.
Ciliary collector
The ciliary collector is located at the rear of the air duct at the top of the machine. It collects the cilia that is detached from the clothes during dry cleaning, thereby preventing clogging into the refrigeration coil.
The first door can be opened by pressing the door button to open the simplified door. When the machine is running, the ciliary collector must be completely closed or the machine will stop working.
The ciliary collector is equipped with a ciliary collection bag, which should be cleaned regularly to avoid affecting the smooth flow of the circulating air.
Clean up:
1 Clean the cilia in the ciliated bag every 3-4 times.
2 Clean the cilia on the second ciliary basket every day.
3 Unscrew the 1st and 2nd fluff baskets every half month, and gently attach the cilia attached to the cartridge with a hard brush.
4 Clean the cilia collection bag once a month with water. When the collection bag is completely dry, it can be used again.
Automatic drying controller
The automatic drying system can automatically adjust the length of drying time according to the type of clothes and the amount of loading. If the load of the underwear is small, it will automatically shorten the drying time of the clothes and automatically control the washing time. Drying time.
The working principle is as follows: During the drying process, the solvent in the clothes flows into the automatic dryer to form a certain liquid level, so that the float floats. When the clothes are dried, the liquid level in the automatic dryer drops, the float is automatically disconnected, and after the computer receives the signal, it automatically transfers to the next automatic program.
In order to prevent dirt from blocking the outlet of the automatic dryer, it must be cleaned weekly. The specific cleaning is as follows:
Loosen the bottom thread, clean the filter and clean the holes if necessary
1 wash once a week 30-40 times or so
2 Unscrew the lower part of the tube and unscrew the bottom thread.
3 Take out the strainer and wash the cilia on the net.
4 put back in the upper and lower size, with the big head facing up.
5 Screw on the screw.
The article comes from Buddha dump: http://
Tool carts are favorable due to lower price and large storage space. Big power tools can be stored on shelves.
Drawer Tool Cart,Service Tool Cart,Utility Tool Cart,Drawer Utility Cart
Changzhou Xingsheng Tianhe Electric Appliance Co., Ltd , https://www.roller-tool-cabinet.com