Bathroom products maintenance recipe

Weekly shower head "makeup remover"

Showers often come in a variety of shower gels, shampoos, detergents, etc. These cleaning products will make the chrome-plated surface of the faucet dull. Take a neutral detergent and spray it on a soft cotton cloth. Gently wipe the faucet once a week. However, do not "bear" the faucet with acid or abrasive detergents or wire brushes. Scale cleaning is an inevitable task for maintaining the shower. According to the different functions of the shower, it can be hand-washed. That is to say, the net cover or other components that adsorb the scale on the shower head should be removed, cleaned with a brush and then returned to the original place. Some brands of showers are equipped with a special shower head opening tool for easy use.

Some sprinkler outlet holes are designed with rubber particles. The rubber material is soft and comfortable to touch, and it is not easy to scale. It is easy to clean. Just wipe the rubber particles with your fingers and you can easily crush and pop the scales. Even if some shower heads have an automatic cleaning function, it is best to open the shower head for a long time to complete a thorough manual cleaning.

Bathing service available soda powder In general, it is better to use a neutral detergent or soap and water to clean the bathtub, avoid the use of detergents for the tile or enamel surface, it is best to clean once a week, to ensure that the bathtub is kept after each use Dry and cool. Clean the tub with a neutral liquid cleaner and use a flexible cloth or sponge. Corrosive cleaners that stay on acrylic surfaces can cause damage. Thoroughly clean the acrylic surface after each use. Do not allow the cleaner to enter the circulatory system. Do not place containers containing liquid cleaner on the surface of the bathtub for long periods of time. Do not use spray. Agents or concentrates or other similar cleaning products. Do not leave metal objects in the bathtub. They will make the bathtub rust and soil the surface. In addition, the use of soda powder to eliminate dirt is also good.

If you are using hot spring bath, there are a few points to pay special attention to. It is best to buy disinfectant, drip, etc. in a pharmacy and drip in a bathtub to disinfect the water. You can also buy a water softener by yourself so that the hot spring water flows into the bathtub after passing through the softener and removes minerals and impurities from the water.

The faucet recommends regular waxing the faucet for a long period of time to cause dirt and tarnish, and to avoid the use of cleaning agents and wipes that damage the polished metal surface. It is best to use a special detergent provided by each brand company, and immediately rinse the residual detergent with clean water, and then use a soft, damp cloth to remove any residual surface water droplets.

As for the wipe tool, most green fiber cushions or sponges contain mineral particles that can scratch the surface of the faucet when used. Please note that the acrylic resin should be acceptable. Hard water marks on taps can be lightly wiped with 50/50 white vinegar and aqueous solution. Waxing is recommended on a regular basis and car waxes or furniture waxes are selected.

Bathroom wash basin avoid hot water cleaning usually clean, the appearance of bathroom porcelain wash basin with soft bristles or sponge dip neutral detergent cleaning, but avoid direct pour hot water cleaning, so as to avoid cracking the wash basin. Once the small scratches on the surface of the bowl become rough, dirt is easily deposited. In addition, the water elbow below the basin can be removed and maintained at ordinary times, and the accumulated stains can be taken out to keep the drainage unobstructed.

If it is a submerged wash basin, when cleaning, pay special attention to the dead space below the mesa and the basin.