Automatic Asphalt Wheel Track Tester

Automatic Asphalt Wheel Track Tester

Summary
    This instrument is designed and made as per industrial standard T0719-2011 Wheel Track Test for Bituminous Materials in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine the wheel track resistance property of bituminous mixtures under high temperature condition(Immersed in water or not immersed in water).
 
I. Main technical features
1. PWM temperature control. It can control : (1)Water temperature in chamber during water immersed wheel track test  
            (2)Ambient temperature of constant temperature chamber at a time. 
2. The constant temperature chamber adopts outside circulatory heating mode. The uniformity and stability is good. No overshoots.
3. It shows time- displacement curves and time- temperature curves during a test. 
4. It equips an absolute temperature sensor. No temperature drift in a long time test.  
5. The mechanical structure adopts wheel movement mode.
6. One wheel tester. It can determine both water immersion test or no water immersion test. 
 
II. Main technical specifications
1. Sample size:         300mm×300mm×(30~200)mm (Grinding wheel molding)
                                  300mm×15mm×50mm(Cutting on site)
2. Working mode:        Rod drive
3. Rubber hardness:      78±2 at 60ºC,international standard. 
4. Test wheel movement:  230mm±10mm
5. Grinding rate:   (42±1)times/min (21 times of returns/min);
6. Loading device: (0.7MPa~1.3 MPa)±0.05Mpa when CPRESS is at 60ºC.
7. Displacement measuring range:    0mm~30mm
8. Displacement measuring accuracy:   <0.01mm
9. Wheel track test time:   60 minutes~240 minutes. 60 minutes is standard.
10. Temperature controle for constant temperature chamber: Ambient temp.~80ºC,precision ±0.3ºC.
11. Deformation measurement:   Precision 0.3%,minimum division 0.005mm.
12. Test temperature:   45ºC~85ºC, precision 0.5ºC
13. Working environment:  Temperature 0ºC~50ºC,RH ≤90%
14. Drive motor power:  0.75kW,1450r/min;
15. Power supply:  3 phases and four lines. Power 3.5KW,The yellow line is working zero line
16. Dimension:   1510mm×740mm×146mm
17. Net weight:   About 0.5 T
 
Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

Automatic Asphalt Wheel Track Tester

Summary
    This instrument is designed and made as per industrial standard T0719-2011 Wheel Track Test for Bituminous Materials in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine the wheel track resistance property of bituminous mixtures under high temperature condition(Immersed in water or not immersed in water).
 
I. Main technical features
1. PWM temperature control. It can control : (1)Water temperature in chamber during water immersed wheel track test  
            (2)Ambient temperature of constant temperature chamber at a time. 
2. The constant temperature chamber adopts outside circulatory heating mode. The uniformity and stability is good. No overshoots.
3. It shows time- displacement curves and time- temperature curves during a test. 
4. It equips an absolute temperature sensor. No temperature drift in a long time test.  
5. The mechanical structure adopts wheel movement mode.
6. One wheel tester. It can determine both water immersion test or no water immersion test. 
 
II. Main technical specifications
1. Sample size:         300mm×300mm×(30~200)mm (Grinding wheel molding)
                                  300mm×15mm×50mm(Cutting on site)
2. Working mode:        Rod drive
3. Rubber hardness:      78±2 at 60ºC,international standard. 
4. Test wheel movement:  230mm±10mm
5. Grinding rate:   (42±1)times/min (21 times of returns/min);
6. Loading device: (0.7MPa~1.3 MPa)±0.05Mpa when CPRESS is at 60ºC.
7. Displacement measuring range:    0mm~30mm
8. Displacement measuring accuracy:   <0.01mm
9. Wheel track test time:   60 minutes~240 minutes. 60 minutes is standard.
10. Temperature controle for constant temperature chamber: Ambient temp.~80ºC,precision ±0.3ºC.
11. Deformation measurement:   Precision 0.3%,minimum division 0.005mm.
12. Test temperature:   45ºC~85ºC, precision 0.5ºC
13. Working environment:  Temperature 0ºC~50ºC,RH ≤90%
14. Drive motor power:  0.75kW,1450r/min;
15. Power supply:  3 phases and four lines. Power 3.5KW,The yellow line is working zero line
16. Dimension:   1510mm×740mm×146mm
17. Net weight:   About 0.5 T
 
Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

Lock Body

Lock Body,Door Lock Body,Zinc Alloy Mortise Lock,Mortise Sliding Door Lock Body

Wenzhou Shenghong Metal Products Co.,Ltd , https://www.shenghonglock.com