What should I do if the house is leaking? How to avoid water leakage?
Leakage of the external wall is a problem that occurs during the construction of the project. It may also be caused by poor material quality, cut corners, etc. How to deal with the leakage of the external wall of the house ? Since there is a problem of leakage of the external wall, it needs to be repaired in time to avoid shortening. The longevity, safety, etc. of a building can lead to serious corrosion of the building, causing it to collapse and so on. Today, Xiaobian will tell you how to deal with the leakage of the exterior wall of the house and how to avoid water leakage.
First, how to do the leakage of the outer wall of the house - treatment method
When the leakage of the external wall occurs, it should be able to find the cause of the leakage of the external wall, and then timely treatment to avoid the leakage of the external wall is getting more and more serious. The main solutions are:
1. Find the location of water seepage, cut through the water seepage area of ​​the outer wall, conduct inspection, find the root cause of water seepage, and then process.
2. If it is seeping water on the bay window. At this time, it can be repaired by grouting, or it can be repaired with the same wall.
3, after repairing inside, the outer wall also needs to be repaired, mainly with paint repair, brushed with waterproof putty 2 times, and then according to other decoration process.
Second, to avoid leakage of the outer wall of the house
1. Reinforce the joint between the infill wall and the structure (1-2 cm) to prevent structural deformation and crushing the infill wall.
2, the elastic connection depends on the external plug PE rod (in order to save the amount of sealant), put on the sealant, pay attention to whether the sealant quality can be stuck on the substrate. Acrylic sealant is generally used for primer coating. Polyurethane is generally not used, but it is more expensive.
3. Cover the above-mentioned seam with glass fiber mesh or wire mesh when making the soil, each side exceeding 5-10 cm.
4, check the characteristics of the soil and the substrate, whether it will produce peeling or peeling. The supplier who can consult the substrate is the most suitable.
5, the same choice of exterior wall putty and paint
The above is a detailed answer to the Xiaobian about how to leak the exterior wall of the house. I don’t know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the leakage of the house wall, how to do the relevant content, Please continue to pay attention to our decoration encyclopedia section!
Besides wet end parts, there are many other important parts,such as cover plate, frame plate, expeller,bearing assembly,etc. We can produce any Slurry Pump Parts with many types of materials,such as elastomer rubber, high chrome,cast iron,grey iron, stainless steel,etc.
Naipu not only supplies chrome-steel and rubber pump wear linings and impellers compatible with all sizes of NP-seires pumps.We also stock all[wet-end"parts including shaft sleeves, packing, lip seals, bearings, glands,expeller rings and much more.
• Volute Liners
• Frame Plate Liners
• Cover Plate Liners
• Throat Bushes
• Bearings
• Shaft Sleeves
• Packing
• Expellers
• Casings
Slurry Pump Spare Parts,Slurry Pump Wet End Parts,Wet End Parts,Bearing Assembly,Centrifugal Pump Parts,Meta Pump Parts
Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com