Home>Bearing knowledge>Analysis of the cause of damage to imported bearings

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Analyze the cause of damage to imported bearings

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Imported bearings have early damage to the audio; that is, whether it is pretending to be impersonating; after all aspects of analysis; it is a personal problem; from the detailed aspects of the analysis; it will be analyzed through the following aspects; This will allow users who have used imported bearings to correctly understand the cause of the loss of the bearing.
First, poor smoothness (about 50%)
According to the survey; poor smoothness is one of the main reasons for the formation of premature bearing damage. The main reasons include: the smoothing agent or smooth oil is not added in time, the smoothing agent or smooth oil is not filled in place, and the smoothing agent or smooth oil is not properly selected. , the smooth method is not correct, etc.
Advocate: Pick the right smoothing agent or smooth oil; use the correct smooth filling method.
Second, the equipment is not appropriate (about 16%)
1, the use of brute force equipment; hammer directly hit the bearing damage to the bearing is the biggest cause of deformation.
2. The equipment is not in place; the equipment has errors or is not loaded into the bearing position; the bearing clearance is too small. The inner and outer rings are not in the middle of the same rotation;
Advocate: Select appropriate or professional bearing equipment; equipment should be tested with special equipment.
Third, exhaustion (about 34%)
Weak damage is a common method of damage to bearings. The common cause of fatigue damage may be: the bearing is overloaded for a long time, not repaired in time, repair is not proper, equipment is aging, etc.
Fourth, pollution (about 14%)
Pollution will also lead to premature bearing damage; pollution refers to sand dust, metal shavings, etc. into the bearing interior. The main reasons include: prematurely open the bearing packaging before use; form pollution, equipment is unsanitary; the formation of pollution, bearing The working environment is unsanitary; the working medium is contaminated.
Advocate: Before use, it is best not to disassemble the packaging of the bearing, and adhere to the sanitation of the equipment environment when the equipment is used; remove the bearing to be used and enhance the sealing equipment of the bearing.
After knowing the imported bearings in this respect; there will be a new understanding of this aspect in the future; and the role in this aspect is also appropriate; this is the condition that the time of the equipment should be known.

---

Recommend to friends comments close window

Bearing related knowledge

How to make the bearing life longer? The characteristics of tapered roller bearings SKF bearing type accuracy grade detailed liquid dynamic pressure bearing BARDEN bearing repair code

This article links to http://
Please indicate China Bearing Network http://

Previous: Common terms and definitions for rolling bearings (2)
Next: Selection of low noise bearings

Brass Floor Drain

Brass Floor Drain,4 Inch Brass Floor Drain,Shower Brass Drain,Anti Odor Floor Drain Brass

Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jmpowerdrain.com