Three major categories of integrated ceiling heaters
Integrated ceiling heaters can be divided into the following categories based on their different materials:
1, bulb series heater
The bulb uses a special infrared quartz heating bulb as a heat source. By direct radiation to heat the indoor air, no preheating is required, and a wide range of heating effects can be obtained instantaneously, which is also the most widely used type on the market.
Lanmute integrated ceiling heating system uses Blue Bird Yuba, one for the 275W, this product is used in the bubble, the height is lower, only 14CM, heavier weight, uniform thickness, longer life, ordinary manufacturers for Artificial bubble, high height, up to 16.5CM, uneven thickness, fragile.
2, PTC series heater
PTC is actually a ceramic heating element. Taking PTC ceramic heating element as heat source, it has the advantages of rapid temperature rise, high thermal efficiency, no light emission, no open flame, long service life, etc. It also has double insurance function and is very safe and reliable. In the industry, PTC mainly includes ceramic PTC and metal PTC. The surface of ceramic PTC is electrified. The ceramic sheet is placed between aluminum and aluminum. The metal PTC is used to put the ceramic sheet into a pipe, so that the PTC surface can be heated without charging. Ceramic PTCs also need to be long and safer.
3, carbon fiber series heater
Carbon fiber is a kind of pure black body heating material, with the characteristics of rapid rise, small thermal hysteresis, uniform heat, long distance of heat radiation transmission, and fast heat exchange. The continuous burning time is more than 6,000 hours, and the corrosion resistance is strong, but the cost is high. Bluemite intelligent integrated ceiling is a new type of carbon fiber infrared heat treatment device, which is the best imported carbon wire heating tube on the market. One carbon wire is 650W, two are 1300W, and the lamp warmer passes the destructive test. After 20 minutes of power-on, no matter what the problem is, spraying it with cool water can work normally. Suitable for a variety of voltage, heat and light evenly, the use of cross-flow fan greatly reduces the potential temperature inside the machine. Lambert carbon fiber heaters are also damp-proof on the cross-flow fan coils, greatly extending the life of infrared heaters. In addition, carbon fibers such as gold tubes not only heat up faster and are hotter and safer.
The health function of carbon fiber heater: carbon fiber has its own far infrared characteristics, compared with other heating elements, it does not need far infrared coating, spectral radiation matching, good absorption performance, radiation wavelength range 8-14μm, and its far-infrared emissivity ≥ 86% , Long-term use of radiation performance does not degenerate, because carbon fiber, also known as active far-infrared material, electric heat exchange rate ≥98%, electrothermal radiation conversion rate ≥78%, its far-infrared radiation has good health care effect, can effectively activate human cell tissue , promote blood circulation, accelerate metabolism, enhance the body's immunity to diseases, but also has the effect of deodorant anti-warm and other anti-insects.
Ceiling integrated ceiling integrated ceiling appliances
Round Rod,stainless steel round rod,fiberglass round rod,round metal rod
Jiangsu Minglu Stainless steel Co.,ltd , https://www.jsminglubolt.com