The whole manufacturing process of road lighting led street lamp pole

2024-02-20 10:07:42

When you see a street lamp standing on a street or a country road, it brings light to people at night. What is the standard and requirements of the entire manufacturing process of the lamp pole. In fact, ordinary lighting cone poles have cold pole plating (using cold galvanized poles), as well as overall hot-dip galvanizing spray treatment

1. Roll rod (q235 flat steel is rolled into a conical shape using the roll rod machine in the factory)

2. Grinding (smooth the rough rod as a whole with a sanding machine)

3. Polishing (using the polishing machine to polish the lamp pole as a whole is beneficial to hot plating and plastic spraying)
4. Welding (Using oxygen welding and arc welding to weld the lamp pole excuse and flange)
5. Hot galvanized
6. Spraying

This knowledge is specific to conical pole street lamps. Different types of lamps will have different process requirements. Garden lamps, special lamps, landscape lamps, etc. will use laser cutting and other processes, so the process standards of street lamp poles Many, no matter what the standard is, if we do it with heart and integrity, we will do a good job

China Street Light Procurement Network http: //

One-hole Basin Faucets

One-hole Basin Faucets are much more user-friendly than the rest basin faucets. Installation is simple and requires the drilling of only one hole.

One-Hole Basin Faucets,Chrome Sink Basin Faucet,Multifunctional Bathroom Basin Faucet,Bathroom Single Handle Basin Faucet

Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com