The relationship between the way the PDU is exported and the maximum power of the PDU

The relationship between the way the PDU is exported and the high power of the PDU:

When we use PDU, we will encounter such a situation: the socket of the device does not match the socket of the PDU. Therefore, I think that when ordering the PDU, you should first check the socket type of the equipment and the power of the facility, and the order of carrying is as follows:

The power of the exported plug of the PDU = the rate of the jack of the device ≥ the power of the device.

The matching relationship between the socket and the socket is as follows:

Universal plug: matching CCC10A national standard jack; small South African 6A plug; Italian 10A plug:

American standard 5-15P plug; European standard 10A plug (no ground); Danish standard 10A plug;

India 10A plug; Germany 10A standard plug; 10A Australian standard plug

If the socket of your device does not match the socket of the PDU and the PDU has been customized, I can change the plug cable of the device, but be sure to pay attention: the load rate of any power socket and power cord must be ≥ the power of the device