Home>Bearing knowledge>The first applicable cage for thrust ball bearings

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

The first applicable cage for thrust ball bearings

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The raceway ring with the raceway-shaped raceway with the raceway and the ball and cage assembly is called the shaft ring; the raceway ring cooperated with the outer casing is called the raceway. The two-way bearing will cooperate with the middle axle. One-way bearings can accept one-way axial loads; two-way bearings can accept two-way axial loads (both can not accept radial loads)
The first applicable cage: steel stamping cage, copper alloy or phenolic resin cutting cage, synthetic resin forming cage. Primary use: automotive steering pin, machine tool spindle

---

Recommend to friends comments close window

Bearing related knowledge

Continuous casting bearing Analyze the precautions of the bearing device in the production process of INA bearing The influence of KOYO bearing radial clearance conditioning on bearing service life and the cause of bearing fatigue damage

This article links to http://
Please indicate the bearing network http://

Previous:The process and method of disassembling the motor (1)
The next part: Application of green production in bearing manufacturing

Fully Threaded Stud

Full thread studs are special grade bolts, represented by material grades. Material substitution for chemical equipment must be confirmed by design before it can be represented. Once, it was seen on site that Grade 4.5 hexagonal bolts were used instead of Grade 8.8 bolts

Fully Threaded Stud,B7 Full Thread Studs,Pressure Resistant Screws,High Strength Fully Threaded Studs

AM FASTENER , https://www.asmefastener.com