The domestic market demand for CNC cutting machine tools will increase

In 2012, China's first CNC cutting machine tool development and testing center is about to be completed, and it is expected to be put into use before the end of the year. Prior to this, the “Technical Requirements and Test Methods for Connector Parts for CNC Cutting Machines” drafted by the relevant national departments began to be implemented. A series of good news has brought speed to the western CNC cutting machine tool industry with great development potential. According to industry insiders, if the proportion of the western CNC cutting machine tool industry in the country increases by 3 to 5 percentage points in the next five years, the western CNC cutting machine tool industry will likely increase the output value by 2-3 billion yuan. The domestic market demand will increase the advantages of high-efficiency, good quality and low cost of CNC cutting machine tools. It is favored by many domestic machinery processing and weekly industries. The introduction of CNC cutting technology and related equipment in China is not long. After more than ten years of digestion and absorption, a number of domestic and large-scale manufacturing enterprises have begun to launch CNC cutting machine tools with completely independent intellectual property rights, and have been recognized by domestic and foreign markets. From the perspective of global industry comparison, the CNC cutting machine tool production base is mainly divided into three regions: Asia, EU and America. The European Union is the most representative of the European CNC Cutting Machine Tool Association, while the major Asian manufacturing countries are China, South Korea and Japan. The three manufacturing bases are also the three main consumer markets. It is reported that in 2010, the world's 28 major CNC cutting machine tool manufacturing countries and regions produced US$66.3 billion, an increase of 21% from US$54.7 billion in 2009. China plays a leading role in the recovery of the world's CNC cutting machine tool industry. China has been the world's largest consumer and importer of CNC cutting machine tools for many years. During 2002 and 2005, imported CNC cutting machine tools accounted for an average of 62% of China's CNC cutting machine tool consumption. During 2006 and 2010, China's domestic CNC cutting machine tool enterprises and some foreign-funded CNC cutting machine tools companies gradually expanded their market share. In 2010, imported CNC cutting machine tools accounted for 33% of consumption. Relevant statistics show that the western manufacturing industry accounts for 9.8% of the country, the CNC cutting machine tool industry accounts for 8.95% of the country, and the metal products industry small CNC cutting machine tools account for 4.28% of the country. It is understood that at present, the sales revenue of the western CNC cutting machine tool industry accounts for about 35% of the western industry, and the sales revenue of metal products accounts for more than 1.5% of the western industry. On the whole, the development of the western CNC cutting machine tool industry is still in its infancy, with a small total scale and low quality, but it also indicates a large space for development and potential. International experience shows that industrialization is an insurmountable historical stage in developing countries and regions. For the vast western region, which accounts for more than 70% of the country's land area and about 28% of the country's total population, accelerating industrialization is an irreplaceable choice. At present, China is in the middle of industrialization. A large number of high-growth industries based on heavy industry such as coal, petrochemical, automobile, steel, real estate, building materials, machinery and electronics are developing strongly, which will definitely constitute a huge market demand for the CNC cutting machine tool industry. Prospects for the CNC cutting machine industry in the West are promising. Luo Baihui, secretary general of the International Mold and Hardware and Plastics Industry Suppliers Association, pointed out that in 2012, the per capita GDP of the western region may exceed 1,000 US dollars; the industrialization rate is close to 40%; the consumption structure will also shift from eating and drinking to using And the level of urbanization in the west in 2020 will probably be close to 50%. The industrialization promotion is mainly reflected in the strategy of local resource transformation in the west, which will lengthen the western industrial chain and further extend the western industry from primary products to finished products, such as deep processing of non-ferrous metals and ferrous metals. Therefore, the demand for CNC cutting machine tools, especially tools, molds and other mechanical CNC cutting machine tools will be increased. In the next five years, the pace of the transfer of industries from foreign and developed regions to the west will accelerate. Foreign investment in China has been accelerating from north to west. At present, some foreign capital, including multinational headquarters and R&D centers, continue to move to Bohai Rim and Northeast China. At the same time, some foreign and eastern coastal industries are resource-dependent and labor-intensive. The trend of high-energy-type industries shifting to the west is estimated to have reached a climax during the 12th Five-Year Plan period. It is worth noting that with the shortage of land and electricity in the Yangtze River Delta, the Pearl River Delta, and even serious shortage of migrant workers and skilled workers, energy resources and environmental constraints are intensifying, and a large number of labor-intensive and energy-intensive enterprises are making a large number of Transferred in the central and western regions. The most active enterprise outflow and capital outflow is Zhejiang. It is reported that most places in Zhejiang are facing a situation where there is no land available, and the power gap is the largest; it is estimated that hundreds of billions of private capital is finding out. From the perspective of national industrial layout, the transfer of a few controlled cutting machine tools in the manufacturing industry to the western region not only conforms to the law of technology gradient transfer, but also promotes the upgrading of coastal industries and drives the development of the western manufacturing industry. Actively preparing and taking the initiative to undertake the transfer of coastal industries is an important opportunity for the accelerated development of the western regions in the future. The central government also made it clear that the country's strategy for developing the western region will not waver, the support for the west will not weaken, and the pace of economic and social development in the west will not slow down. In particular, in the future, the country’s long-term construction of national debt, budgetary investment and special construction funds will continue to lean toward the western region; while continuing to strengthen key construction projects in the west and rural infrastructure construction, it will increase basic education and public health in the western region. Financial support for social undertakings. All kinds of factors indicate that the western CNC cutting machine tool industry will show a good development prospect in the future. A new type of industrialization development road Luo Baihui believes that in the new era of the 12th Five-Year Development, if the western CNC cutting machine tool industry wants to achieve rapid development, it must abandon the traditional development model as the whole country, and follow the requirements of the scientific development concept and take a new road to industrialization. . Relying on technology to extend the resource processing chain and maximize the added value of manufacturing. The west is an area rich in natural resources in China, but the resource processing chain in the west is short and the added value is low. For example, the output value of the western non-ferrous metal mining industry accounted for 33.54% of the country, while the non-ferrous metal smelting and rolling processing industry accounted for only 27.12% of the national total, and the eastern part was 34.56% and 45.70% respectively. If the western deep processing coefficient can reach the national level or even the eastern developed areas, the manufacturing output value of the western region will multiply, which is also the key way to truly transform the resource advantages of the western region into economic advantages. Develop green manufacturing and promote resource conservation and environmentally friendly development. Green manufacturing is a manufacturing system that takes into account the optimal use of resources and environmental impact. Its main purpose is to make industrial products from design, manufacture, packaging, transportation, use to end-of-life products with minimal impact on the environment, without damaging the human body. Health and resource efficiency. In accordance with this concept and requirements, the development of manufacturing in the western region can avoid the devastating consequences for resources and the environment, and achieve sustainable development strategies that are developed in protection and protected in development. Pay attention to the development of human resources, and combine the reduction of labor costs with the increase of employment. The proportion of employment in the western primary industry is still above 60%, which is higher than 10% of the national total. The transfer of a large number of rural labor will provide sufficient and cheap labor supply for the western manufacturing industry. Therefore, the western region should pay attention to vigorously develop labor-intensive industries, small and medium-sized enterprises and individual and private economies that absorb too much labor. This will not only reduce the labor costs of manufacturing, but also enhance market competitiveness, and at the same time help ease the employment pressure in the western region. Maintain social stability. Give play to the enterprise cluster effect of high-tech parks and cultivate regional competitiveness. The western region is sparsely populated, the capital is scarce, and the development of the manufacturing industry should not bloom everywhere. It should rely on the central city to select some regional key development and construction with better basic conditions. In particular, it is necessary to use the state-level development zones in the west as an important carrier to guide the development of regional leading industries and affiliated enterprise clusters, thereby forming an incubation base for manufacturing industries with competitive advantages in the west.

Pet Screen

Pet Screen,Pet Screen Net,Pet Door Mesh,Polyester Mesh Screen

wuqiang huihuang fiberglass factory , https://www.hh-windowmesh.com