Superhard Materials Branch Third Council Work Report (1)
2024-07-09 03:06:02
0. The introduction is over time, and the years are like a shuttle. The super-hard materials branch has been working for the third council for more than four years. On the eve of the formation of the new council, I will report to the member representative conference for more than four years on behalf of the three councils. Please come to the work.
Over the past four years, the world situation, national policies and the situation of the industry have undergone major changes. In particular, the world financial crisis that was transformed from the US subprime mortgage crisis in 2008 has had a great impact on the development of the world economy and the industry. The industry has experienced a substantial increase in raw materials prices and continued product price reductions, the US anti-I diamond circular saw blade dumping case, diamond exports only exclusive operation of the Shanghai Diamond Exchange, six-sided diamonds are excluded from the high-tech products by the state, super Hard materials and products are not explicitly included in the national key support areas, most products are not subject to the increase in export tax rebates, but the super-hard materials products have not been improved simultaneously, etc., and the unfair treatment and great difficulties from home and abroad, the direct leadership of the three councils in the General Assembly Under the strong support of the majority of member units, with the full enthusiasm of advancing with the times, we must earnestly implement the scientific development concept, firmly grasp the key to improve the core competitiveness of enterprises, and actively guide enterprises to make strategic adjustments in a timely manner and vigorously promote Technological progress and scientific management, and strive to open up domestic and foreign markets, have made due contributions to the development of industry enterprises in the years of trouble, so that the industry has achieved hard-won sustainable development and good results. The role of the “bridge†and “link†of the club has been better played, and the influence, appeal, cohesion and combat effectiveness of the club have been effectively improved. The work of the club has won many praises from the General Conference and praise from member units.
1. The development of the industry can be seen from Table 1: The lowest growth rate of industrial output value of 46-75 enterprises from 2005 to 2008 is 13%. Table 1 The growth of some enterprises in 2005-2008* refers to the year-on-year enterprise data. The growth rate is not the growth rate of the data calculated in the table.
The average growth rate of the four-year growth rate is 20.8%; the three-year average growth rate of diamond production is 13.7%; the average annual growth rate of cubic boron nitride is 9.1%, and the average annual growth rate of various products is three years. 29.3%. The industry is generally in a period of rapid growth. In 2006, the industry's various product structure adjustments were relatively strong, and the growth rate was relatively low. In 2008, the growth rate was affected by the financial crisis, but the growth rate of various products was very high. This is a good phenomenon, indicating that many years of advocating efforts to develop products. The results have clearly appeared in the past two years.
It can be seen from Tables 2 to 3 that the export of China's diamond and super-hard abrasive wheel products is growing rapidly. The average annual growth rate of diamonds in the past three years was 38.3%. The average growth rate of super-hard abrasive wheel products in the past three years was 53.1%. Although the average export unit price was very low, it quickly occupied the international market. According to other customs data, the two types of products were directly exported to 110 countries and regions in the world in 2008, and six more than in 2007. In addition to entrepot trade, the products of this industry have spread all over the world.
In general, in recent years, the industry's production and sales have been booming, the market has become active, and the international popularity has gradually increased. The structural adjustment and technological development have been healthy, orderly, rapid, and effective.
2. Completion of the tasks of the General Conference 2.1 Conducting planning research and guiding the development of the industry In 2004, in accordance with the deployment of the General Conference, we carried out the research and formulation of the “Eleventh Five-Year†development plan for the superhard materials industry. In the unfavorable situation of no fund research, small staff time, etc., use the situation mastered by the Secretariat to first throw out the first draft, then send it to the industry experts for comments, summarize the comments and then modify, and then seek comments at the Standing Committee expansion meeting, and then modify In addition, the industry conference was used to discuss the plan extensively, so that the opinions of industry experts were fully sought, so that the planning is feasible and has guiding significance for the development of the industry. Finally, the meeting of the manager's meeting was finalized after the study was finalized, forming a general report on the “Eleventh Five-Year Plan†guiding opinions of the industry. The Secretariat has devoted a great deal of effort and sweat to this task and completed its mission in 2005 over a year. It has contributed to the completion of the overall “Eleventh Five-Year Plan†of the machine tool industry.
2.2 Carrying out industrial policy research and seeking a good development environment for enterprises In order to cooperate with the General Conference to complete the “Development Policy Research on Machine Tool Industry†issued by the Ministry of Industry and Information Technology, our branch actively carried out the “Research on the Development Policy of Superhard Materials Industryâ€. The two most important policy issues affecting the development of the industry and the measures taken are as follows.
2.2.1 Except for the six-faced diamond, the bitter industry. In April 2008, the Ministry of Science and Technology, the Ministry of Finance and the State Administration of Taxation issued the "Notice on the Management Measures for the Recognition of High-Tech Enterprises" in the "Notice on the Management Measures for the Recognition of High-tech Enterprises" in the National Science and Technology Commission [2008] No. 172 document (hereinafter referred to as "the high-tech field supported by the state" "Fourth: New Material Technology, (2) Inorganic Non-Metallic Materials, 3. Artificial Crystal Growth Technology" in the "Article 172 Attachment") specifically states "except for the six-faced diamond", which has caused a major impact on the healthy development of the industry. influences! Since the publication of this article, it has aroused strong repercussions in the super-hard materials industry. After extensive discussion and consultation in various aspects, it also cooperated with the headquarters of the Association to complete the "Development Policy Research on Machine Tool Industry" issued by the Industry Department of the Ministry of Industry and Information Technology. In order to formulate industrial development policies in the new era. From November 10th to 11th, 2008, the club organized the chairman, general manager and chief engineer of major backbone enterprises to hold a special seminar in Zhengzhou. After careful discussion by the participants, a consensus was reached and a solemn proposal was made: 1. Remove the “except for the six-faced diamonds†specified in the attachment to Circular 172, and add the “Technology for the production of super-hard materials and productsâ€. Six-sided diamond and other super-hard materials are treated with the high-tech products that should have been. The production technology of super-hard materials and products is clearly included in the high-tech field and supported by key points! 2. The state and local governments at all levels should fully understand the importance of the super-hard materials and products industry in the national economy, and give priority support to the super-hard materials and products industries. 3. The relevant state departments shall list the super-hard materials and products with the customs commodity number and tariff code, and restore the export tax rebate rate of super-hard materials and products to the original level. Through the above measures, the industry will be able to fully catch up with the world's advanced level as soon as possible, laying a solid foundation for the overall upgrading of China's manufacturing industry. After the meeting, the Secretariat carried out the following activities: 1. Form these proposals into the Super League (2008) No. 014 document reported to the Torch Center of the Ministry of Science and Technology; 2. Form the (2009) No. 019 document to the Torch Center of the Ministry of Science and Technology; 3. Solicitors of the Chinese Academy of Sciences, Professor of State Key Laboratory of Superhard Materials of Jilin University, Zou Guangtian, Academician of Chinese Academy of Engineering, Member of the National Committee of the Chinese People's Political Consultative Conference, Professor Shen Dezhong of China National Materials Research Institute of China National Materials Institute, Academician of Chinese Academy of Engineering, President of Central South University, CPC 10 Huang Boyun, the representative of the Sixth and Seventeenth National Congress, the director of the National 863 High-Technology and New Materials Expert Committee, and the chief scientist of the 973 project, on the “Proposal on Listing the Superhard Materials and Products Industry in the “High-tech Fields Supported by the State†Signature reported to the Torch Center of the Ministry of Science and Technology. 4. Requested the National People's Congress and Chairman of Henan Huanghe Cyclone Co., Ltd. Qiao Qiusheng to contact the representatives of multiple representatives during the 2009 National People's Congress to submit “On the inclusion of superhard materials and products industry in the country. "Supported documents for high-tech fields" supported by key support; 5. Request for China International Engineering The consulting company drafted the internal leaders of the State Council and the vice-premier. 6. The Secretary-General once sought the opportunity to report to Liang Gui, director of the Torch Center of the Ministry of Science and Technology, and reported to the High-tech Enterprise of the Torch Center several times with the leaders of Nanyang Zhongnan Diamond Co., Ltd. . The leaders of the Ministry of Science and Technology have accepted our suggestion and strive to jointly revise the documents with the Ministry of Finance and the State Administration of Taxation in 2009; 7. Through the internal reference of China International Engineering Consulting Corporation, "Investment Decision Consulting", "Encourage the development of China's independent intellectual property rights." In the hard material industry, it was submitted to the General Office of the State Council, the State-owned Assets Supervision and Administration Commission, the National Development and Reform Commission, the National Defense Science and Technology Commission, the Ministry of Finance, the relevant departments of the State Council, and the provinces (cities, districts) in three levels in June 2009. Financial Institutions. Through this series of activities, efforts are made to improve the policy space for the development of superhard materials.
2.2.2 Diamond supervision and management of the industry. In May 2002, the General Administration of Customs issued the "Procedures of the People's Republic of China on the Supervision and Control of Diamonds in and out of the Shanghai Diamond Exchange", which fully integrated the export of synthetic diamonds in our industry into the scope of supervision and only allowed the Shanghai Diamond Exchange to exclusively operate the products. It has had a major impact on the industry. We have been relentlessly responding to the problem for many years and have used the document "Report on the Proposed Establishment of Special Tariff Codes for Synthetic Diamonds", "Report on the Proposal for Customs and Related Departments to Change the Numbers of Artificial and Natural Diamonds", and "Proposal for National Customs The emergency report of the import and export of synthetic diamonds according to the abrasive products shall be reported to the relevant national authorities through the general meeting and the general meeting. In 2005, only the Shanghai Diamond Exchange was able to operate the artificial diamond import and export business. The ice has been broken, and the local customs have started the business. From May 2002 to the end of 2004, the industry enterprises suffered huge losses. Better, by 2006, the relevant government departments finally accepted some of our recommendations and set up a special tariff number 7151020 for synthetic diamonds. However, the General Administration of Customs issued the Order No. 152 in September 2006, which stipulates that diamond powder under the tax number should be exported at the Shanghai Diamond Exchange, while imports do not need to go through the Shanghai Diamond Exchange. However, local customs have not strictly implemented this order, and the company has not encountered much problems in export in recent years. We are still reporting to customs and other national authorities through possible channels, striving to completely separate from natural diamonds and remove barriers to exports.
In March 2009, the “Superhard Materials Industry Development Policy Research†report was completed. In June, according to the opinions of the General Conference, additional amendments were submitted to the General Conference to seek a good policy space for the industry and to complete the general meeting. Contributed.
2.3 Writing part of the Abrasive Abrasives of China Machine Tool Industry Yearbook For more than four years, there have been 5 parts of the Abrasive Abrasives of China Machine Tool Industry Yearbook, accounting for more than 140,000 words. The content includes ordinary abrasives, superhard materials and products, coated abrasives, and contributed to the official publication of the China Machine Tool Industry Yearbook.
2.4 Groups participated in the exhibition organized by the General Assembly and participated in the China CNC Machine Tool Exhibition and China International Machine Tool Exhibition organized by the General Conference for more than four years. The exhibition has 65 exhibitions and the largest exhibition area is 195 m2 (excluding Occupy the number of exhibition areas of other clubs). Every time I meet the International Machine Tool Show, I will always allocate too little area to my club, which is far from meeting the requirements. Participating in the exhibition is an effective way to promote corporate image, display product level and open up domestic and foreign markets. The exhibitors who have participated in the exhibition for many years have already tasted the sweetness. Every exhibition has actively registered and strived to expand the exhibition area. More enterprises have not tried it yet. In particular, there are few exhibitors in the CNC machine tool exhibition, and they always think that the exhibition cost is large. The market is more understandable, it is better to directly develop the market. The scale and level of CNC machine tools exhibitions are already very high. Moreover, some international exhibitors and purchasing groups have participated in the conference, and the results are quite good. I hope more manufacturers of grinding wheels can fully understand the importance of the exhibition and actively participate.
Table 4 Statistics of participation in the current term of office 2.5 Organized enterprises to participate in the “six top ten enterprises†declaration of the General Conference, and encouraged the industry to produce more than four boutiques for more than four years and participated in the “six top ten enterprises†report evaluation organized by the General Conference. In the activity, six companies have won the title of 19 top ten enterprises. Among the 26 clubs and more than 1,400 member companies in the General Conference, it is not easy for my club to be listed on the list every year. The “CNC output value, product sales revenue, export earnings, and comprehensive economic benefits†in the top ten enterprise appraisal are based on the enterprise report data, and the honor is valid for one year; the top ten brand activities and the top ten independent innovations (new projects in 2008) It is carried out through procedures such as enterprise declaration, club recommendation, user satisfaction survey, quality supervision agency inquiry and general assessment. The honor is valid for three years. It should be noted that the Yellow River and Central and South China companies are well-known in the top ten list of brand-creating activities every year. It is the manufacturer of famous brand products in China for many years. Any company that can go to the Chinese brand list can report directly to the list on time. See Table 5 for details.
Table 5 The categories and enterprises that won the General Conference awards during the term of office 3. The activities of the clubs have organized more than 30 domestic and international events, including 17 meetings in the form of domestic conferences, and received foreign groups to visit and exit. International conferences and exhibitions 14 times. Through these activities, we will continue to exchange domestic enterprise management experience, continuously explore the direction of technology development, timely coordinate the methods of enterprises responding to emergencies, continuously promote the integration of domestic and foreign enterprises, continuously promote the technological development and product level of China's industry, and continuously open up our industry. The international market of products has effectively guided and promoted the healthy development of the industry. The activities are summarized below.
3.1 Domestic Activities In a nutshell, my club organizes an annual executive director (expansion) meeting, a meeting of key key enterprise leaders and an industry technology development forum. The former focuses on conveying the spirit of the meeting of the general meeting of the general meeting and the review meeting. The annual work summary and the current work plan; the focus of the symposium is to exchange the management experience of key enterprises, discuss the key work and efforts of the association in the same year, and in 2008, in preparation for the international conference, the meeting will be held in conjunction with the fifth Zhengzhou International Conference; Focus on the latest research results of the industry's technology and products and the future direction of technology development. Each forum has lectures by universities, research institutes and first-line experts in scientific research and production to guide enterprises to develop in the right direction. In addition, in the event of an emergency, we will promptly organize relevant enterprise conferences to study the response measures. For example, in 2005, the US anti-Immune circular saw blade dumping case, the export tax rebate was lowered in 2007 (some products were cancelled). In 2008, the Ministry of Science and Technology Torch Center excluded the six-faced diamond from high-tech products. Convene meetings in a timely manner to unify the thinking of various units and agree on countermeasures. These three emergencies, with the joint efforts of all of them, have achieved positive results in varying degrees. In addition to the “except for six-face diamonds, bitter industry†and “diamond supervision, management industry†mentioned in Section 2.2 of this paper, there are two major events as follows:
(1) Anti-dumping is full of twists and turns, and the future is uncertain. During the May 1st, 2005, the American Diamond Saw Blade Manufacturers Association submitted anti-dumping applications to China's and South Korea's diamond circular saws and components to the US Department of Commerce (DOC) and the International Trade Commission (ITC). After receiving the news on May 4, the club reported to the General Assembly immediately and held an anti-dumping work meeting with the Electromechanical Chamber of Commerce and Stone Association in Shanghai on May 11. Actively support and cooperate with chambers of commerce and lawyers to participate in corporate response. By the end of the year, there was information that the EU was also preparing to launch an anti-dumping procedure. We were able to provide relevant data to the responding companies while we were preparing and set up an anti-dumping early warning working group. On June 15, 2006, the US DOC first decided to lose the case between China and South Korea. The dumping tax rate for steel research was 2.5%, the dumping tax rate was 34.19%, the dumping tax rate was 48.5%, and the other 26 companies involved in the responding average tax rate. The dumping rate is 20.72%, and the dumping tax rate for non-participating companies is 164.09%. China's responding companies have paid a heavy price, especially the three companies that responded to the separate tax rate paid about 300,000 US dollars / enterprise, and other companies that responded to the average tax rate also paid a price of 10,000 to 20,000 US dollars / enterprise. On June 19, 2006, the US ITC reportedly ruled that the diamond circular saw blades and their parts exported to the United States from China and South Korea would not damage the corresponding industries in the United States by 4 votes to 2 votes. On July 11, ITC officially released this. The final conclusion, this really makes us happy for a while! However, the prosecutor in this case dissatisfied with this ruling and prosecuted the final ruling of ITC. On February 6, 2008, the US International Trade Court (CIT) asked ITC to retry the ruling in this case. On May 14, the same year, ITC released a new diamond saw blade from China and South Korea. The result of the ruling. On January 13, 2009, the US International Trade Court (CIT) confirmed the ITC review ruling. On January 22, ITC notified the Ministry of Commerce of the ruling of the trial. After that, the Korean company and Saint-Gobain China Company filed an appeal again, and the Steel Research Company also filed a complaint. This time, the appeal will take another year to reach a conclusion. If we lose, we will start to supplement the anti-dumping on January 23, 2009. tax. Due to this uncertainty, the company is currently cautious in exporting American diamond circular saw blades. It’s a twist and a twist, and the future is uncertain.
(2) Conduct vocational skills appraisal and open the promotion channel for workers. Under the strong support of the Zhengzhou Abrasives Grinding Research Institute, the club applied for the establishment of the “Mechanical Industry Occupational Skills Identification Abrasives Industry Sub-center†in 2007, under the “Mechanical Industry Vocational Skills Appraisal and Guidance Centerâ€. "(hereinafter referred to as 'the center'), there is an additional bond with the enterprise, and one more channel for the enterprise. The main content of the work is to train, assess, appraise and issue national unified certificates for the five skill levels of the workers, “primary, middle and senior workers, technicians, senior techniciansâ€, to train high-skilled talents for the industry and promote sustainable development of the industry. In 2008, the company trained 47 students from home enterprises, including ordinary abrasives, ordinary abrasives, super-hard abrasives, super-hard materials and coated abrasives, and obtained the Ministry of Labor and Social Security (currently human resources and social security). The Ministry of Economic Affairs issued 16 senior examiner qualification certificates, 20 examiner qualification certificates, and 11 administrator qualification certificates. Some of the students have obtained the qualifications of the assessor or senior assessor and also obtained the administrator qualification. The first team of examiners and managers in the abrasives industry has been established, and they will contribute to the selection of highly skilled personnel for the abrasives industry. The drafting of the professional skills standards for abrasives and abrasives has been completed and the second revision has been completed. After the central review, it will be submitted to the National Human Resources and Social Security Department for approval.
The specific activities in the past four years are shown in Table 6.
Table 6 2005-2009 Superhard Materials Branch Domestic Activities
[1]. Five points of consensus: 1. The three companies will continue to develop new technologies, improve and stabilize product quality, and promote the level of China's diamonds to a higher level; 2. Take effective measures to create a level playing field and The low level of competition for vicious price reductions is driven by high levels of competition that improve and stabilize product quality and improve the quality of pre-sales and after-sales services. Gradually move towards higher level competition of product division of labor, market division of labor, mutual support, and harmonious development; 3 and 3 enterprises will jointly participate in the revision and revision of industry standards, first standardize and then move toward unified sales guidance price; 4. Recent arrangements The deputy general manager in charge of marketing specifically negotiated cooperation methods; 5 and 3 business leaders met 2 to 4 times a year to analyze the development situation, discuss cooperation methods, and lead the industry to make progress together.
[2]. 4 common points: 1. Have a strong sense of nationality, 2. Have a sense of responsibility to strengthen and expand the national industry, 3. Have obvious product and technology advantages, master core technology, 4. Advanced management concepts with characteristics And methods.
[3]. The new five-point consensus: 1. As a large enterprise, we must aim at the international competitors, establish the international brand of China's diamonds and the image of a strong country. 2. We must compete to improve product quality and pre-sales and after-sales service. To compete for price reduction promotion; 3. Take care of the interests of small and medium-sized enterprises, do not compete with the market demand for low-end products and small special product market, and guide enterprises to take a differentiated development path; 4. Do not carry out a “tear-saw battle†with the same customer. Market segmentation; 5. In the first half of 2007, each maintains the stability of the price system. If major marketing measures are introduced, the other parties will be notified in advance, and the meeting will be held in the second half of the year to summarize the operation in the first half of the year and discuss the measures for the second half of the year.
[4]. 3 suggestions: 1. Enterprises should reduce production costs and adapt to market changes through internal control measures such as technological progress, energy saving, management optimization, etc. 2. Due to the continuous increase in raw material and energy prices, enterprises have been unable to completely digest themselves. The cost increase factor should be adjusted accordingly to the price of export products; 3. Each enterprise should adjust the export price from July 1, 2007 according to its own strength and digestive level.
[5]. 4 points of consensus: 1. The state and local governments at all levels should fully recognize the importance of the superhard materials and products industrial system, and give priority support to the special projects for superhard materials and products. 2. Strive to eliminate the “except for the six-faced diamond†in the annex of the Ministry of Science and Technology, the Ministry of Finance and the State Administration of Taxation [2008] No. 172. Listed in the "Superhard Materials and Products" entry. 3. It is recommended that the relevant state departments should list the super-hard materials and products with the customs commodity number and tariff code. 4. Strive for the state to restore the export tax rebate rate of super-hard materials and products to the original level.
3.2 International Activities Over the past four years, the club has hosted foreign groups to visit and leave the country for 14 international conferences and exhibitions. The most worth mentioning is that the Secretary-General has publicized the papers of my industry and the 5th Zhengzhou International Superhard Materials and Products Seminar organized by myself at the American and Australian International Conferences. In 2006, he gave a speech on "China's six-sided top press and synthetic diamond" at the US conference, claiming that China's diamonds have reached the world's second-highest level; in 2008, at the US conference, "six-sided top and two-sided top presses "Comparative study on diamond production performance" speech, claiming that China's diamond has reached the world's most high-end level; this year at the Australian International Conference on the "China's diamond industry development" topic, more systematically publicize China's diamond industry in recent years Achievements. Promote the promotion of the world market for our products.
Table 7 International Activities of Superhard Materials Branch 2005-2009 The 5th Zhengzhou International Superhard Materials and Products Symposium and the 45th Anniversary of the Birth of Chinese Synthetic Diamonds were held in Zhengzhou from September 4th to 8th, 2008. This conference is a grand ceremony of China's diamond industry and a grand event of the world's peers; it is the highest-profile, most content-rich, most influential and unprecedented scale in the history of the super-hard materials industry; it is a friendship conference of the world's peers; it is a new technology, The exhibition of new products and the negotiation meeting of business cooperation; it is a meeting to review the glorious history, look forward to the glorious future full of hope, and promote the world's superhard materials to flourish! The academic content of the seminar was of paramount importance, and the Secretariat worked hardest in this area and the preparations were the earliest. On the occasion of the Zhuhai Industry Technology Forum held in November 2007, a meeting of the Technical Expert Committee of the Branch was held. The meeting heard the report on the preparatory work of the Secretariat. This meeting has been included as an important part of the 2007 work plan of the club and officially started preparations. During the Diamond International Conference held in Rome in April 2007, Secretary-General Li Zhihong had extensive contacts with the Secretary of the Indian Industrial Diamond Association, the Japanese company of Japan, the United States, Japan, the United Kingdom, Germany, Belgium and other countries, and invited them. Written for the International Conference and attend the conference at that time; in June and October 2007, the association organized a delegation to Russia and Ukraine for the same kind of publicity and invitation; in April 2008 at the Shanghai International Stone Fair, Beijing CNC Machine Tool Exhibition During the international conference organized by the American Industrial Diamond Association in May, the 5th ZISC color leaflet was widely distributed. At the same time, it was widely contacted and negotiated, and invited colleagues to write and attend the conference. The club's website----China's super-hard materials network special edition edition for the pre-, post-, and post-conference tracking reports, ensuring timely and timely online publication of the conference preparation and progress, reflecting the speed of network information and Timeliness, so that domestic and foreign people who care about the industry can keep abreast of the meeting at home. Long-term three-dimensional publicity has greatly increased the visibility and influence of the conference. The book materials compiled by the Secretariat for the conference are: Chinese papers with 70 papers (700,000 words), English papers with 34 papers (160,000 words), industry yearbook (340,000 words), abrasives communication Magazine No. 8 (90,000 words) in 2008, Diamond and Abrasives Engineering Journal No. 4 (200,000 words) in 2008, with a total of 1.49 million words, and a list of industry vendors (400,000 words), totaling 6 With a volume of 1.89 million words, it laid a solid foundation for academic research.
The opening ceremony of the conference was presided over by Secretary-General Li Zhihong. There are 538 representatives of officially registered domestic conferences. Because they are not registered, they cannot arrange for more than 200 people to attend the conference hotel and Zhengzhou City without registration. The number of participants in the conference has been estimated to be more than 700. The number of exhibitors and visitors should be more than 1,200. There are 50 representatives from foreign countries and Hong Kong and Taiwan, from 12 countries and regions. At the General Assembly reception on September 5th, the five associations “Dongliang Enterpriseâ€, which made outstanding contributions to the development of the super-hard materials industry, and enthusiastically participated in the industry, awarded medals and prizes for various professional fields in superhard materials. The leading geese have also made selfless contributions to the development of the industry. The six companies sponsoring the conference have awarded “Excellent Enterprise†medals and prizes. They have long-term cooperation with China’s super-hard materials industry, and have always cared and supported our association every time. Elemental Six Co., Ltd., an internationally renowned company of the International Conference, awarded the "International Friendly Cooperation Award" medals and prizes. The atmosphere of the awards was warm and shocking! In order to guide enterprises to re-engineer, develop, adjust product structure, increase product added value, internal quality, expand the market, care about industry development, support the work of the association has played a positive role in promoting and promoting, and further strengthen international cooperation in the future. Good driving action.
The conference arranged a total of 3 full-day academic reports, including 75 papers, 65 of which were technical development papers, and the Entrepreneur Forum arranged 10 management papers with 10 industry-influenced entrepreneurs. 26 papers were published in English and 49 papers were published in Chinese. The biggest highlight of the paper presentation was the report by the Secretary-General Li Zhihong and representatives of the United States, Japan, South Korea, and Taiwan. These five reports introduce the overall situation of diamond development in China, the United States, Japan, South Korea and the world with a large number of data and charts. In particular, the specific data of industry development in the United States, Japan and Korea is something we have never systematically obtained. The extremely valuable information on the development of the world diamond industry will have an important and far-reaching impact on entrepreneurs' decision-making and industry development. At the same time, foreign representatives have seen the strong development of the Chinese industry and will have an important and far-reaching impact on them. The conference used the hotel's outdoor basketball court and other open spaces to set up four exhibition areas: a documentary exhibition area and three product exhibition areas. A total of 39 standard exhibition booths and 33 exhibiting companies (including the association's own data booths) are set up, which is more than three times larger than the desktop exhibitions of the same kind of international associations held by the American Industrial Diamond Association in May 2008. The products on display include the latest publications in the industry and technical books, magazines, yearbooks and other literature materials (in the check-in hall) compiled by Taiwanese technicians, diamond abrasives and various products, as well as some small equipment. The exhibition is highly professional, and it can be said that the exhibition attached to the International Association is the best exhibition for industrial enterprises. The successful convening of this conference has been highly praised by representatives from home and abroad, and will have a profound impact on the sustainable development and technological progress of the super-hard materials industry. The conference proceedings will become an important document for the development of the industry. The high specifications, the large number of foreign guests, and the far-reaching influence have created a new high in the history of the industry, and both academic and economical trade have achieved a bumper harvest. This conference is a united conference, a victorious conference. We must work hard to carry forward the spirit of the conference in the future development of the industry, bravely surpass ourselves and march forward toward the great goal of a super-hard material power!
Over the past four years, the world situation, national policies and the situation of the industry have undergone major changes. In particular, the world financial crisis that was transformed from the US subprime mortgage crisis in 2008 has had a great impact on the development of the world economy and the industry. The industry has experienced a substantial increase in raw materials prices and continued product price reductions, the US anti-I diamond circular saw blade dumping case, diamond exports only exclusive operation of the Shanghai Diamond Exchange, six-sided diamonds are excluded from the high-tech products by the state, super Hard materials and products are not explicitly included in the national key support areas, most products are not subject to the increase in export tax rebates, but the super-hard materials products have not been improved simultaneously, etc., and the unfair treatment and great difficulties from home and abroad, the direct leadership of the three councils in the General Assembly Under the strong support of the majority of member units, with the full enthusiasm of advancing with the times, we must earnestly implement the scientific development concept, firmly grasp the key to improve the core competitiveness of enterprises, and actively guide enterprises to make strategic adjustments in a timely manner and vigorously promote Technological progress and scientific management, and strive to open up domestic and foreign markets, have made due contributions to the development of industry enterprises in the years of trouble, so that the industry has achieved hard-won sustainable development and good results. The role of the “bridge†and “link†of the club has been better played, and the influence, appeal, cohesion and combat effectiveness of the club have been effectively improved. The work of the club has won many praises from the General Conference and praise from member units.
1. The development of the industry can be seen from Table 1: The lowest growth rate of industrial output value of 46-75 enterprises from 2005 to 2008 is 13%. Table 1 The growth of some enterprises in 2005-2008* refers to the year-on-year enterprise data. The growth rate is not the growth rate of the data calculated in the table.
The average growth rate of the four-year growth rate is 20.8%; the three-year average growth rate of diamond production is 13.7%; the average annual growth rate of cubic boron nitride is 9.1%, and the average annual growth rate of various products is three years. 29.3%. The industry is generally in a period of rapid growth. In 2006, the industry's various product structure adjustments were relatively strong, and the growth rate was relatively low. In 2008, the growth rate was affected by the financial crisis, but the growth rate of various products was very high. This is a good phenomenon, indicating that many years of advocating efforts to develop products. The results have clearly appeared in the past two years.
It can be seen from Tables 2 to 3 that the export of China's diamond and super-hard abrasive wheel products is growing rapidly. The average annual growth rate of diamonds in the past three years was 38.3%. The average growth rate of super-hard abrasive wheel products in the past three years was 53.1%. Although the average export unit price was very low, it quickly occupied the international market. According to other customs data, the two types of products were directly exported to 110 countries and regions in the world in 2008, and six more than in 2007. In addition to entrepot trade, the products of this industry have spread all over the world.
In general, in recent years, the industry's production and sales have been booming, the market has become active, and the international popularity has gradually increased. The structural adjustment and technological development have been healthy, orderly, rapid, and effective.
2. Completion of the tasks of the General Conference 2.1 Conducting planning research and guiding the development of the industry In 2004, in accordance with the deployment of the General Conference, we carried out the research and formulation of the “Eleventh Five-Year†development plan for the superhard materials industry. In the unfavorable situation of no fund research, small staff time, etc., use the situation mastered by the Secretariat to first throw out the first draft, then send it to the industry experts for comments, summarize the comments and then modify, and then seek comments at the Standing Committee expansion meeting, and then modify In addition, the industry conference was used to discuss the plan extensively, so that the opinions of industry experts were fully sought, so that the planning is feasible and has guiding significance for the development of the industry. Finally, the meeting of the manager's meeting was finalized after the study was finalized, forming a general report on the “Eleventh Five-Year Plan†guiding opinions of the industry. The Secretariat has devoted a great deal of effort and sweat to this task and completed its mission in 2005 over a year. It has contributed to the completion of the overall “Eleventh Five-Year Plan†of the machine tool industry.
2.2 Carrying out industrial policy research and seeking a good development environment for enterprises In order to cooperate with the General Conference to complete the “Development Policy Research on Machine Tool Industry†issued by the Ministry of Industry and Information Technology, our branch actively carried out the “Research on the Development Policy of Superhard Materials Industryâ€. The two most important policy issues affecting the development of the industry and the measures taken are as follows.
2.2.1 Except for the six-faced diamond, the bitter industry. In April 2008, the Ministry of Science and Technology, the Ministry of Finance and the State Administration of Taxation issued the "Notice on the Management Measures for the Recognition of High-Tech Enterprises" in the "Notice on the Management Measures for the Recognition of High-tech Enterprises" in the National Science and Technology Commission [2008] No. 172 document (hereinafter referred to as "the high-tech field supported by the state" "Fourth: New Material Technology, (2) Inorganic Non-Metallic Materials, 3. Artificial Crystal Growth Technology" in the "Article 172 Attachment") specifically states "except for the six-faced diamond", which has caused a major impact on the healthy development of the industry. influences! Since the publication of this article, it has aroused strong repercussions in the super-hard materials industry. After extensive discussion and consultation in various aspects, it also cooperated with the headquarters of the Association to complete the "Development Policy Research on Machine Tool Industry" issued by the Industry Department of the Ministry of Industry and Information Technology. In order to formulate industrial development policies in the new era. From November 10th to 11th, 2008, the club organized the chairman, general manager and chief engineer of major backbone enterprises to hold a special seminar in Zhengzhou. After careful discussion by the participants, a consensus was reached and a solemn proposal was made: 1. Remove the “except for the six-faced diamonds†specified in the attachment to Circular 172, and add the “Technology for the production of super-hard materials and productsâ€. Six-sided diamond and other super-hard materials are treated with the high-tech products that should have been. The production technology of super-hard materials and products is clearly included in the high-tech field and supported by key points! 2. The state and local governments at all levels should fully understand the importance of the super-hard materials and products industry in the national economy, and give priority support to the super-hard materials and products industries. 3. The relevant state departments shall list the super-hard materials and products with the customs commodity number and tariff code, and restore the export tax rebate rate of super-hard materials and products to the original level. Through the above measures, the industry will be able to fully catch up with the world's advanced level as soon as possible, laying a solid foundation for the overall upgrading of China's manufacturing industry. After the meeting, the Secretariat carried out the following activities: 1. Form these proposals into the Super League (2008) No. 014 document reported to the Torch Center of the Ministry of Science and Technology; 2. Form the (2009) No. 019 document to the Torch Center of the Ministry of Science and Technology; 3. Solicitors of the Chinese Academy of Sciences, Professor of State Key Laboratory of Superhard Materials of Jilin University, Zou Guangtian, Academician of Chinese Academy of Engineering, Member of the National Committee of the Chinese People's Political Consultative Conference, Professor Shen Dezhong of China National Materials Research Institute of China National Materials Institute, Academician of Chinese Academy of Engineering, President of Central South University, CPC 10 Huang Boyun, the representative of the Sixth and Seventeenth National Congress, the director of the National 863 High-Technology and New Materials Expert Committee, and the chief scientist of the 973 project, on the “Proposal on Listing the Superhard Materials and Products Industry in the “High-tech Fields Supported by the State†Signature reported to the Torch Center of the Ministry of Science and Technology. 4. Requested the National People's Congress and Chairman of Henan Huanghe Cyclone Co., Ltd. Qiao Qiusheng to contact the representatives of multiple representatives during the 2009 National People's Congress to submit “On the inclusion of superhard materials and products industry in the country. "Supported documents for high-tech fields" supported by key support; 5. Request for China International Engineering The consulting company drafted the internal leaders of the State Council and the vice-premier. 6. The Secretary-General once sought the opportunity to report to Liang Gui, director of the Torch Center of the Ministry of Science and Technology, and reported to the High-tech Enterprise of the Torch Center several times with the leaders of Nanyang Zhongnan Diamond Co., Ltd. . The leaders of the Ministry of Science and Technology have accepted our suggestion and strive to jointly revise the documents with the Ministry of Finance and the State Administration of Taxation in 2009; 7. Through the internal reference of China International Engineering Consulting Corporation, "Investment Decision Consulting", "Encourage the development of China's independent intellectual property rights." In the hard material industry, it was submitted to the General Office of the State Council, the State-owned Assets Supervision and Administration Commission, the National Development and Reform Commission, the National Defense Science and Technology Commission, the Ministry of Finance, the relevant departments of the State Council, and the provinces (cities, districts) in three levels in June 2009. Financial Institutions. Through this series of activities, efforts are made to improve the policy space for the development of superhard materials.
2.2.2 Diamond supervision and management of the industry. In May 2002, the General Administration of Customs issued the "Procedures of the People's Republic of China on the Supervision and Control of Diamonds in and out of the Shanghai Diamond Exchange", which fully integrated the export of synthetic diamonds in our industry into the scope of supervision and only allowed the Shanghai Diamond Exchange to exclusively operate the products. It has had a major impact on the industry. We have been relentlessly responding to the problem for many years and have used the document "Report on the Proposed Establishment of Special Tariff Codes for Synthetic Diamonds", "Report on the Proposal for Customs and Related Departments to Change the Numbers of Artificial and Natural Diamonds", and "Proposal for National Customs The emergency report of the import and export of synthetic diamonds according to the abrasive products shall be reported to the relevant national authorities through the general meeting and the general meeting. In 2005, only the Shanghai Diamond Exchange was able to operate the artificial diamond import and export business. The ice has been broken, and the local customs have started the business. From May 2002 to the end of 2004, the industry enterprises suffered huge losses. Better, by 2006, the relevant government departments finally accepted some of our recommendations and set up a special tariff number 7151020 for synthetic diamonds. However, the General Administration of Customs issued the Order No. 152 in September 2006, which stipulates that diamond powder under the tax number should be exported at the Shanghai Diamond Exchange, while imports do not need to go through the Shanghai Diamond Exchange. However, local customs have not strictly implemented this order, and the company has not encountered much problems in export in recent years. We are still reporting to customs and other national authorities through possible channels, striving to completely separate from natural diamonds and remove barriers to exports.
In March 2009, the “Superhard Materials Industry Development Policy Research†report was completed. In June, according to the opinions of the General Conference, additional amendments were submitted to the General Conference to seek a good policy space for the industry and to complete the general meeting. Contributed.
2.3 Writing part of the Abrasive Abrasives of China Machine Tool Industry Yearbook For more than four years, there have been 5 parts of the Abrasive Abrasives of China Machine Tool Industry Yearbook, accounting for more than 140,000 words. The content includes ordinary abrasives, superhard materials and products, coated abrasives, and contributed to the official publication of the China Machine Tool Industry Yearbook.
2.4 Groups participated in the exhibition organized by the General Assembly and participated in the China CNC Machine Tool Exhibition and China International Machine Tool Exhibition organized by the General Conference for more than four years. The exhibition has 65 exhibitions and the largest exhibition area is 195 m2 (excluding Occupy the number of exhibition areas of other clubs). Every time I meet the International Machine Tool Show, I will always allocate too little area to my club, which is far from meeting the requirements. Participating in the exhibition is an effective way to promote corporate image, display product level and open up domestic and foreign markets. The exhibitors who have participated in the exhibition for many years have already tasted the sweetness. Every exhibition has actively registered and strived to expand the exhibition area. More enterprises have not tried it yet. In particular, there are few exhibitors in the CNC machine tool exhibition, and they always think that the exhibition cost is large. The market is more understandable, it is better to directly develop the market. The scale and level of CNC machine tools exhibitions are already very high. Moreover, some international exhibitors and purchasing groups have participated in the conference, and the results are quite good. I hope more manufacturers of grinding wheels can fully understand the importance of the exhibition and actively participate.
Table 4 Statistics of participation in the current term of office 2.5 Organized enterprises to participate in the “six top ten enterprises†declaration of the General Conference, and encouraged the industry to produce more than four boutiques for more than four years and participated in the “six top ten enterprises†report evaluation organized by the General Conference. In the activity, six companies have won the title of 19 top ten enterprises. Among the 26 clubs and more than 1,400 member companies in the General Conference, it is not easy for my club to be listed on the list every year. The “CNC output value, product sales revenue, export earnings, and comprehensive economic benefits†in the top ten enterprise appraisal are based on the enterprise report data, and the honor is valid for one year; the top ten brand activities and the top ten independent innovations (new projects in 2008) It is carried out through procedures such as enterprise declaration, club recommendation, user satisfaction survey, quality supervision agency inquiry and general assessment. The honor is valid for three years. It should be noted that the Yellow River and Central and South China companies are well-known in the top ten list of brand-creating activities every year. It is the manufacturer of famous brand products in China for many years. Any company that can go to the Chinese brand list can report directly to the list on time. See Table 5 for details.
Table 5 The categories and enterprises that won the General Conference awards during the term of office 3. The activities of the clubs have organized more than 30 domestic and international events, including 17 meetings in the form of domestic conferences, and received foreign groups to visit and exit. International conferences and exhibitions 14 times. Through these activities, we will continue to exchange domestic enterprise management experience, continuously explore the direction of technology development, timely coordinate the methods of enterprises responding to emergencies, continuously promote the integration of domestic and foreign enterprises, continuously promote the technological development and product level of China's industry, and continuously open up our industry. The international market of products has effectively guided and promoted the healthy development of the industry. The activities are summarized below.
3.1 Domestic Activities In a nutshell, my club organizes an annual executive director (expansion) meeting, a meeting of key key enterprise leaders and an industry technology development forum. The former focuses on conveying the spirit of the meeting of the general meeting of the general meeting and the review meeting. The annual work summary and the current work plan; the focus of the symposium is to exchange the management experience of key enterprises, discuss the key work and efforts of the association in the same year, and in 2008, in preparation for the international conference, the meeting will be held in conjunction with the fifth Zhengzhou International Conference; Focus on the latest research results of the industry's technology and products and the future direction of technology development. Each forum has lectures by universities, research institutes and first-line experts in scientific research and production to guide enterprises to develop in the right direction. In addition, in the event of an emergency, we will promptly organize relevant enterprise conferences to study the response measures. For example, in 2005, the US anti-Immune circular saw blade dumping case, the export tax rebate was lowered in 2007 (some products were cancelled). In 2008, the Ministry of Science and Technology Torch Center excluded the six-faced diamond from high-tech products. Convene meetings in a timely manner to unify the thinking of various units and agree on countermeasures. These three emergencies, with the joint efforts of all of them, have achieved positive results in varying degrees. In addition to the “except for six-face diamonds, bitter industry†and “diamond supervision, management industry†mentioned in Section 2.2 of this paper, there are two major events as follows:
(1) Anti-dumping is full of twists and turns, and the future is uncertain. During the May 1st, 2005, the American Diamond Saw Blade Manufacturers Association submitted anti-dumping applications to China's and South Korea's diamond circular saws and components to the US Department of Commerce (DOC) and the International Trade Commission (ITC). After receiving the news on May 4, the club reported to the General Assembly immediately and held an anti-dumping work meeting with the Electromechanical Chamber of Commerce and Stone Association in Shanghai on May 11. Actively support and cooperate with chambers of commerce and lawyers to participate in corporate response. By the end of the year, there was information that the EU was also preparing to launch an anti-dumping procedure. We were able to provide relevant data to the responding companies while we were preparing and set up an anti-dumping early warning working group. On June 15, 2006, the US DOC first decided to lose the case between China and South Korea. The dumping tax rate for steel research was 2.5%, the dumping tax rate was 34.19%, the dumping tax rate was 48.5%, and the other 26 companies involved in the responding average tax rate. The dumping rate is 20.72%, and the dumping tax rate for non-participating companies is 164.09%. China's responding companies have paid a heavy price, especially the three companies that responded to the separate tax rate paid about 300,000 US dollars / enterprise, and other companies that responded to the average tax rate also paid a price of 10,000 to 20,000 US dollars / enterprise. On June 19, 2006, the US ITC reportedly ruled that the diamond circular saw blades and their parts exported to the United States from China and South Korea would not damage the corresponding industries in the United States by 4 votes to 2 votes. On July 11, ITC officially released this. The final conclusion, this really makes us happy for a while! However, the prosecutor in this case dissatisfied with this ruling and prosecuted the final ruling of ITC. On February 6, 2008, the US International Trade Court (CIT) asked ITC to retry the ruling in this case. On May 14, the same year, ITC released a new diamond saw blade from China and South Korea. The result of the ruling. On January 13, 2009, the US International Trade Court (CIT) confirmed the ITC review ruling. On January 22, ITC notified the Ministry of Commerce of the ruling of the trial. After that, the Korean company and Saint-Gobain China Company filed an appeal again, and the Steel Research Company also filed a complaint. This time, the appeal will take another year to reach a conclusion. If we lose, we will start to supplement the anti-dumping on January 23, 2009. tax. Due to this uncertainty, the company is currently cautious in exporting American diamond circular saw blades. It’s a twist and a twist, and the future is uncertain.
(2) Conduct vocational skills appraisal and open the promotion channel for workers. Under the strong support of the Zhengzhou Abrasives Grinding Research Institute, the club applied for the establishment of the “Mechanical Industry Occupational Skills Identification Abrasives Industry Sub-center†in 2007, under the “Mechanical Industry Vocational Skills Appraisal and Guidance Centerâ€. "(hereinafter referred to as 'the center'), there is an additional bond with the enterprise, and one more channel for the enterprise. The main content of the work is to train, assess, appraise and issue national unified certificates for the five skill levels of the workers, “primary, middle and senior workers, technicians, senior techniciansâ€, to train high-skilled talents for the industry and promote sustainable development of the industry. In 2008, the company trained 47 students from home enterprises, including ordinary abrasives, ordinary abrasives, super-hard abrasives, super-hard materials and coated abrasives, and obtained the Ministry of Labor and Social Security (currently human resources and social security). The Ministry of Economic Affairs issued 16 senior examiner qualification certificates, 20 examiner qualification certificates, and 11 administrator qualification certificates. Some of the students have obtained the qualifications of the assessor or senior assessor and also obtained the administrator qualification. The first team of examiners and managers in the abrasives industry has been established, and they will contribute to the selection of highly skilled personnel for the abrasives industry. The drafting of the professional skills standards for abrasives and abrasives has been completed and the second revision has been completed. After the central review, it will be submitted to the National Human Resources and Social Security Department for approval.
The specific activities in the past four years are shown in Table 6.
Table 6 2005-2009 Superhard Materials Branch Domestic Activities
[1]. Five points of consensus: 1. The three companies will continue to develop new technologies, improve and stabilize product quality, and promote the level of China's diamonds to a higher level; 2. Take effective measures to create a level playing field and The low level of competition for vicious price reductions is driven by high levels of competition that improve and stabilize product quality and improve the quality of pre-sales and after-sales services. Gradually move towards higher level competition of product division of labor, market division of labor, mutual support, and harmonious development; 3 and 3 enterprises will jointly participate in the revision and revision of industry standards, first standardize and then move toward unified sales guidance price; 4. Recent arrangements The deputy general manager in charge of marketing specifically negotiated cooperation methods; 5 and 3 business leaders met 2 to 4 times a year to analyze the development situation, discuss cooperation methods, and lead the industry to make progress together.
[2]. 4 common points: 1. Have a strong sense of nationality, 2. Have a sense of responsibility to strengthen and expand the national industry, 3. Have obvious product and technology advantages, master core technology, 4. Advanced management concepts with characteristics And methods.
[3]. The new five-point consensus: 1. As a large enterprise, we must aim at the international competitors, establish the international brand of China's diamonds and the image of a strong country. 2. We must compete to improve product quality and pre-sales and after-sales service. To compete for price reduction promotion; 3. Take care of the interests of small and medium-sized enterprises, do not compete with the market demand for low-end products and small special product market, and guide enterprises to take a differentiated development path; 4. Do not carry out a “tear-saw battle†with the same customer. Market segmentation; 5. In the first half of 2007, each maintains the stability of the price system. If major marketing measures are introduced, the other parties will be notified in advance, and the meeting will be held in the second half of the year to summarize the operation in the first half of the year and discuss the measures for the second half of the year.
[4]. 3 suggestions: 1. Enterprises should reduce production costs and adapt to market changes through internal control measures such as technological progress, energy saving, management optimization, etc. 2. Due to the continuous increase in raw material and energy prices, enterprises have been unable to completely digest themselves. The cost increase factor should be adjusted accordingly to the price of export products; 3. Each enterprise should adjust the export price from July 1, 2007 according to its own strength and digestive level.
[5]. 4 points of consensus: 1. The state and local governments at all levels should fully recognize the importance of the superhard materials and products industrial system, and give priority support to the special projects for superhard materials and products. 2. Strive to eliminate the “except for the six-faced diamond†in the annex of the Ministry of Science and Technology, the Ministry of Finance and the State Administration of Taxation [2008] No. 172. Listed in the "Superhard Materials and Products" entry. 3. It is recommended that the relevant state departments should list the super-hard materials and products with the customs commodity number and tariff code. 4. Strive for the state to restore the export tax rebate rate of super-hard materials and products to the original level.
3.2 International Activities Over the past four years, the club has hosted foreign groups to visit and leave the country for 14 international conferences and exhibitions. The most worth mentioning is that the Secretary-General has publicized the papers of my industry and the 5th Zhengzhou International Superhard Materials and Products Seminar organized by myself at the American and Australian International Conferences. In 2006, he gave a speech on "China's six-sided top press and synthetic diamond" at the US conference, claiming that China's diamonds have reached the world's second-highest level; in 2008, at the US conference, "six-sided top and two-sided top presses "Comparative study on diamond production performance" speech, claiming that China's diamond has reached the world's most high-end level; this year at the Australian International Conference on the "China's diamond industry development" topic, more systematically publicize China's diamond industry in recent years Achievements. Promote the promotion of the world market for our products.
Table 7 International Activities of Superhard Materials Branch 2005-2009 The 5th Zhengzhou International Superhard Materials and Products Symposium and the 45th Anniversary of the Birth of Chinese Synthetic Diamonds were held in Zhengzhou from September 4th to 8th, 2008. This conference is a grand ceremony of China's diamond industry and a grand event of the world's peers; it is the highest-profile, most content-rich, most influential and unprecedented scale in the history of the super-hard materials industry; it is a friendship conference of the world's peers; it is a new technology, The exhibition of new products and the negotiation meeting of business cooperation; it is a meeting to review the glorious history, look forward to the glorious future full of hope, and promote the world's superhard materials to flourish! The academic content of the seminar was of paramount importance, and the Secretariat worked hardest in this area and the preparations were the earliest. On the occasion of the Zhuhai Industry Technology Forum held in November 2007, a meeting of the Technical Expert Committee of the Branch was held. The meeting heard the report on the preparatory work of the Secretariat. This meeting has been included as an important part of the 2007 work plan of the club and officially started preparations. During the Diamond International Conference held in Rome in April 2007, Secretary-General Li Zhihong had extensive contacts with the Secretary of the Indian Industrial Diamond Association, the Japanese company of Japan, the United States, Japan, the United Kingdom, Germany, Belgium and other countries, and invited them. Written for the International Conference and attend the conference at that time; in June and October 2007, the association organized a delegation to Russia and Ukraine for the same kind of publicity and invitation; in April 2008 at the Shanghai International Stone Fair, Beijing CNC Machine Tool Exhibition During the international conference organized by the American Industrial Diamond Association in May, the 5th ZISC color leaflet was widely distributed. At the same time, it was widely contacted and negotiated, and invited colleagues to write and attend the conference. The club's website----China's super-hard materials network special edition edition for the pre-, post-, and post-conference tracking reports, ensuring timely and timely online publication of the conference preparation and progress, reflecting the speed of network information and Timeliness, so that domestic and foreign people who care about the industry can keep abreast of the meeting at home. Long-term three-dimensional publicity has greatly increased the visibility and influence of the conference. The book materials compiled by the Secretariat for the conference are: Chinese papers with 70 papers (700,000 words), English papers with 34 papers (160,000 words), industry yearbook (340,000 words), abrasives communication Magazine No. 8 (90,000 words) in 2008, Diamond and Abrasives Engineering Journal No. 4 (200,000 words) in 2008, with a total of 1.49 million words, and a list of industry vendors (400,000 words), totaling 6 With a volume of 1.89 million words, it laid a solid foundation for academic research.
The opening ceremony of the conference was presided over by Secretary-General Li Zhihong. There are 538 representatives of officially registered domestic conferences. Because they are not registered, they cannot arrange for more than 200 people to attend the conference hotel and Zhengzhou City without registration. The number of participants in the conference has been estimated to be more than 700. The number of exhibitors and visitors should be more than 1,200. There are 50 representatives from foreign countries and Hong Kong and Taiwan, from 12 countries and regions. At the General Assembly reception on September 5th, the five associations “Dongliang Enterpriseâ€, which made outstanding contributions to the development of the super-hard materials industry, and enthusiastically participated in the industry, awarded medals and prizes for various professional fields in superhard materials. The leading geese have also made selfless contributions to the development of the industry. The six companies sponsoring the conference have awarded “Excellent Enterprise†medals and prizes. They have long-term cooperation with China’s super-hard materials industry, and have always cared and supported our association every time. Elemental Six Co., Ltd., an internationally renowned company of the International Conference, awarded the "International Friendly Cooperation Award" medals and prizes. The atmosphere of the awards was warm and shocking! In order to guide enterprises to re-engineer, develop, adjust product structure, increase product added value, internal quality, expand the market, care about industry development, support the work of the association has played a positive role in promoting and promoting, and further strengthen international cooperation in the future. Good driving action.
The conference arranged a total of 3 full-day academic reports, including 75 papers, 65 of which were technical development papers, and the Entrepreneur Forum arranged 10 management papers with 10 industry-influenced entrepreneurs. 26 papers were published in English and 49 papers were published in Chinese. The biggest highlight of the paper presentation was the report by the Secretary-General Li Zhihong and representatives of the United States, Japan, South Korea, and Taiwan. These five reports introduce the overall situation of diamond development in China, the United States, Japan, South Korea and the world with a large number of data and charts. In particular, the specific data of industry development in the United States, Japan and Korea is something we have never systematically obtained. The extremely valuable information on the development of the world diamond industry will have an important and far-reaching impact on entrepreneurs' decision-making and industry development. At the same time, foreign representatives have seen the strong development of the Chinese industry and will have an important and far-reaching impact on them. The conference used the hotel's outdoor basketball court and other open spaces to set up four exhibition areas: a documentary exhibition area and three product exhibition areas. A total of 39 standard exhibition booths and 33 exhibiting companies (including the association's own data booths) are set up, which is more than three times larger than the desktop exhibitions of the same kind of international associations held by the American Industrial Diamond Association in May 2008. The products on display include the latest publications in the industry and technical books, magazines, yearbooks and other literature materials (in the check-in hall) compiled by Taiwanese technicians, diamond abrasives and various products, as well as some small equipment. The exhibition is highly professional, and it can be said that the exhibition attached to the International Association is the best exhibition for industrial enterprises. The successful convening of this conference has been highly praised by representatives from home and abroad, and will have a profound impact on the sustainable development and technological progress of the super-hard materials industry. The conference proceedings will become an important document for the development of the industry. The high specifications, the large number of foreign guests, and the far-reaching influence have created a new high in the history of the industry, and both academic and economical trade have achieved a bumper harvest. This conference is a united conference, a victorious conference. We must work hard to carry forward the spirit of the conference in the future development of the industry, bravely surpass ourselves and march forward toward the great goal of a super-hard material power!
Brass knurled thread insert Made of brass material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Brass knurled Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
We are manufacturer of Insert Nut in China, if you want to buy Embedment Insert Nut,Brass Threaded Knurled Insert,Insert Thread Nuts please contact us.
knurled insert nut,threaded insert nut,wood insert nut,brass insert nut,furniture insert nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com