Stone wall decoration process

2024-07-10 17:01:02

>>>Natural stone pollution treatment method

Natural granite, marble wall construction and construction process:
1. Natural granite, marble plate wall structure:
Natural stone is heavier. In order to ensure safety, double insurance is generally adopted. That is, the plate is tied with copper wire at the grassroots level and cement mortar is grouted. The veneer sheet and the structural wall are separated by 3 to 5 centimeters. As a grouting joint, the height of each infusion is about 20 centimeters after pouring, and the infusion is continued after solidification.
2. Natural granite, marble plate wall construction technology:
Grass-roots processing â†’ installation of basic steel bar â†’ plate drilling â†’ banding plate â†’ grouting â†’ caulking â†’ polishing.

Green stone wall surface construction and construction process:
The construction of the quartzite wall surface and the construction process can be pasted in a similar manner to the glazed tile. Bluestone has a high water absorption rate, and it must be soaked with water before it is applied.
For home decoration, small size stone and man-made stone can be used for reference.

Veneer wall decoration process:
(A) The basic process of veneer decoration
1. Paste glazed tiles:
Grassroots cleaning â†’ wipe base gray â†’ brick â†’ soak â†’ brick â†’ line â†’ paste standard points â†’ paste tile â†’ scratch â†’ wipe â†’ clean.
2. Paste ceramic tile:
Clean up the base â†’ wipe the base gray â†’ brick line â†’ paste â†’ remove paper â†’ scratch.
3. Construction points
1) When handling grassroots, all types of dirt on the wall should be cleaned and watered and moistened one day in advance. The concrete wall surface should be chiseled to remove the raised part, cut the base layer, and clean the floating ash. Or use 107 cement cement mortar to pull hair. After rubbing the base ash, when the bottom layer is 6 to 70% dry, the line of bricks is arranged.
2.) Before the official paste must be pasted standard points, to control the smoothness of the paste surface, the operation should be used at any time to check the flatness by the ruler, uneven, not straight, to remove the re-adhesive.
3) Tiles must be soaked in clean water for more than two hours before they are affixed. Tiles should not be bubbling and should be taken out for drying.
4) When meeting the pipeline, lighting switch, bathroom equipment support, etc., must use a whole set of bricks to cut anastomosis.
5) After finishing the inlay, wipe the surface with a cotton thread and then wipe with a white grout.
4. Precautions
1) The grassroots must be cleaned up, and there must be no floating soil or floating dust. The old wall surface will be cleaned of the original mortar surface.
2) The tiles must be dried after soaking. Because the drying board is plastered, the moisture of the mortar will be quickly sucked away by the plates, causing dehydration of the cement mortar, affecting the setting and hardening of the mortar, and problems such as emptying and lifting.

Wall Construction Acceptance Cement Marble Decorative Switch Marble Tiles Bathroom Tiles Tile Tile Tiles Specifications

Plasma Consumables Compatible for OTC

EDAWELD Co., Ltd. professional production Plasma Consumables Compatible for OTC. We have Electrode, Nozzles are used on model OTC D-7000, OTC D-12000. OTC is very famous Japan brand, Japanese plasma consumables. They main produce mig welding torches and plasma cutting torches. We copy OTC Plasma Consumables are made by imported high-quality copper and use superb CNC technology. So they got bright surface and cutting speed, less wear and tear, as compared with the original parts, we can reach 90%. But our low prices, it is worth buying.

Plasma Consumables Compatible for OTC, D-7000 Electrode and Nozzle,D-12000 Electrode and Nozzle,H839K03 Nozzle 0.3mm,H839M00 Electrode

EDAWELD COMPANY LIMITED , https://www.jsedaweld.com