SKF vertical bearing housing depiction principle
2024-02-08 17:06:41
| Home>Bearing knowledge> SKF vertical bearing housing depiction principle |
SKF vertical bearing housing depiction principle
Source: China Bearing Network Time: 2018-06-21
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Establishing the bearing housing system: The base of the SNL vertical bearing housing system is some bearing housings with the same but different sizes. The SNL vertical bearing housings are combined with these bearing housings with different specification seals; they can be supplied to the standard series. A variety of housing types. SNL vertical housings are capable of supplying shaft diameters from 20 to 160 mm.
Reinforced base: The base of the bearing housing is reinforced by ribs around the bolt holes and additional information to improve the support on the base plate. The coupling bolts can be preloaded; the SKF housings are better fixed; the housings cannot be made Deformation of the base or housing bore.
Connection: The standard SKF bearing housing has two coupling bolt holes on the base. The standard 511-609 and larger housings also have four cast coupling bolt holes; type marked FSNL. Imported vertical housing These larger housings also have no connecting bolt holes (blind base; type marked SSNLD); however, they are limited to ductile cast iron. Others; smaller housings below 511-609 can also be used for four Bolt device. There is a mark on the drilled hole.
Outstanding thermal conductivity: additional ribs on the base of the bearing housing; the imported vertical housing provides additional surface area between the base and the base plate; improves heat dissipation of the bearing.
Easy to smooth: SNL bearing housing is equipped with a grease nipple with two tapping hole nozzles on the cover. The smooth bearing or other nozzle orientation of the seal has a cast mark SKF bearing seat.
The cover and the base are separated from each other: the base and cover of the bearing seat are matched during production; they cannot be interchanged with each other. To avoid disorder, the cover and base of each bearing housing are marked with the same serial number.
Device help: In order to simplify the device and make the alignment more accurate; there is a casting mark on the end face of the bearing seat; indicating the shaft hole and straightness of the bearing seat hole. The device clarifies that the SNL vertical bearing seat is also supplied with each bearing seat.
Device hole identification for other components: castable markings for drilling positions; for loading pins, condition monitors and additional grease nipples.
Recommend to friends comments close window
| Bearing related knowledge |
| Analysis: Bearing anti-rust method Bearing accuracy level common sense: Y-bearing bearing steel with flat head screws to determine the essence of non-metallic debris action research Bearing loading and unloading force key details |
This article links to http://
Please indicate the bearing network http://
Previous: SKF imported bearing features and common problems analysis Next: Identify whether Japan NSK bearing imported bearings can be reused
STAINLESS STEEL PRODUCTS
Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.
Stainless Steel Tube,Seamless Stainless Steel Tube,Welded Stainless Steel Tube
YUHONG HOLDING GROUP CO.,LIMITED , https://www.alloypipeline.com