Remanufacturing of auto parts helps China's auto industry

At the 2007 China International Automotive Industry Development Forum, Dong Yang, executive vice president and secretary general of the China Association of Automobile Manufacturers, made a report on "Remanufacturing to Create Green Fortune". Dong Yang pointed out that auto parts remanufacturing is an important way for the auto industry to develop a circular economy.

Remanufacturing is the industrialization of high-tech repair and transformation of waste products. It is not only an advanced manufacturing that saves resources, but also a green manufacturing that protects the environment. According to the data, the global remanufacturing industry's output value in 2005 is estimated to exceed 100 billion US dollars. Among them, the US remanufacturing industry is the largest, with more than 75 billion US dollars, and the automotive and construction machinery sector accounts for more than 2/3, about 50 billion US dollars. The US automotive remanufacturing industry has covered engines, transmissions, clutches, steering gears, and air conditioning compressors. Wait for assembly parts. In the automotive after-sales service industry, remanufactured products account for 85% of the repair parts market. Dong Yang cited an example. Caterpillar Inc. has established 14 remanufacturing plants in seven countries including the United States, Britain, France, Mexico, and China. In 2005, the company's remanufactured output value exceeded 1.5 billion US dollars, and then remanufactured 2 million pieces of waste monomer parts; in the same year, the company established Remanufacturing Industry Co., Ltd. in Shanghai, the factory covers an area of ​​4,000 square meters.

The two documents No. 21 and No. 22 promulgated by the State Council of China in 2005 pointed out that the state will vigorously "support the remanufacturing of waste products and re-manufacture" and list "green remanufacturing technology" as "the relevant departments of the State Council and local people's governments at all levels must One of the key and common projects of large economic support." On April 21, 2006, Vice Premier Zeng Peiyan instructed the National Development and Reform Commission's "Report on the Development of Auto Parts Remanufacturing Industry and Suggestions for Relevant Countermeasures": agreeing to use auto parts as a pilot for remanufacturing industry, exploring experience and developing technology; At the same time, we must consider the revision of relevant laws and regulations in a timely manner. In June 2007, Vice Premier Zeng Peiyan instructed the former Minister of Machinery Industry He Guangyuan to speed up the remanufacturing of auto parts: promptly amend the regulations and start one or two pilots. Once again, the State Council’s attitude toward supporting the remanufacturing of auto parts was demonstrated. The pilot work of auto parts remanufacturing is an important part of the national circular economy pilot program. The National Development and Reform Commission is studying and drafting the “Pilot Program for Remanufacturing of Auto Parts”.

Next page

1200nm LED

We are 1200nm LED manufacturer from China.

We will do the High temperature resistance testing and 10 hours ageing treatment before the product out off the factory, which can ensure the stability of each product.

Our LED products have 5 year warranty.

We are the best supplier for your light-emitting diode.

We supply variety of 1200nm IR LED(Infrared LED) products. Including Through-hole 1200nm LED, SMD 1200nm LED and high-power 1200nm LED. We can also produce 1200nm LED according to your requirement.


For the Through-hole Light Emitting Diode 1200nm LED,

We can customize the shape, the lighting angle, the number of emitting source, the flat pin LED and braided LED. Such as: infrared 5mm 1200nm LED with 5 degree, infrared 5mm 1200nm LED with 20 degree, infrared 5mm 1200nm LED with 30 degree, infrared 5mm 1200nm LED with 45 degree, infrared 5mm 1200nm LED with 60 degree, infrared 5mm 1200nm with 90 degree, infrared 5mm 1200nm LED with 120 degree. Infrared 3mm 1200nm LED with 3 degree, infrared 3mm 1200nm LED with 20 degree, infrared 3mm 1200nm LED with 30 degree, infrared 3mm 1200nm LED with 45 degree, infrared 3mm 1200nm LED with 60 degree, infrared 3mm 1200nm with 90 degree, infrared 3mm 1200nm LED with 120 degree ect.

There are many other shapes or color of lens for your choose. Customized infrared LED are available


For the SMD LED 1200nm LED,

We can supply dual-chip infrared LED, three-chip infrared LED, multi-chip infrared LED, high voltage LED, flashing infrared LED and variety of size SMD LED. For instance: 3528 SMD infrared 1200nm LED, 2835 SMD infrared 1200nm LED, 3014 SMD infrared 1200nm LED, 1206 SMD infrared 1200nm LED, 3020 SMD infrared 1200nm LED.
There are also have many other shapes to choose, like the 5050 SMD infrared LED, the 5730 SMD infrared LED ect. You can choose any one of them for your requirement.


1200nm led is a infrared LED(IR LED). Common infrared LEDs are like: 1200nm IR LED, 1250nm IR LED and so on.

1200nm LED, 1200nm Infrared LED, 1200nm IR LED, High Power 1200nm IR LED

Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com