Old wooden floor renovation method floor renovation considerations
Flooring is one of the decoration materials that every family uses. We pay more attention to it, and there are many problems when the floor is used for a long time. So many people will think about how to make the floor new. However, everyone does not know how to do the renovation of the old floor, so everyone will have all kinds of troubles. Today, Xiaobian will take a look at the old wooden floor renovation method and renovation considerations!
Old wooden floor renovation method
The first step: sanding the floor
The first step in floor refurbishment is to use a large floor refurbishing machine to remove the lacquer layer and the surface layer 1-2 mm. Note that sandpaper of 40 mesh, 80 mesh and 120 mesh thickness is used for grinding three times. The larger the mesh size, the smaller the sandpaper particles, and the less scratches left by the sanding, ensuring that the polished surface is fine and smooth.
The second step: scraping putty
After the floor is polished, it is necessary to scrape the putty to level the floor, use the special transparent primer putty matched with the floor paint, and scrape it on the polished floor to be dry.
The third step: brush primer, color processing
After the putty is applied, the floor is then primed or tinted. Since the texture of the solid wood surface is natural, it is impossible to change the color of the color, and only the depth of the floor color can be adjusted.
The fourth step: brush topcoat
After the primer is dry, brush the topcoat, dry it again, and then grind it with water sandpaper. Grind the floor surface to a rough feel, remove the dust, and brush the second coat.
Step 5: Polishing and polishing
After the topcoat is dried, use professional waxing equipment to polish the floor with floor wax.
Old wooden floor renovation considerations
1. It should be noted that not all floors can be refurbished. Only solid wood floors, parquet and bamboo flooring with a surface thickness of 4 mm or more can be refurbished. Because the initial grinding will wear off 1-2 mm, the too thin floor is easy to polish out the middle layer, affecting the life of the floor, so it is best to know the thickness of the surface of the floor before the refurbishment.
2. If the color on the solid wood composite parquet block is not the saturated color, but the surface layer is colored, or the color of the veneer layer is relatively thin, it will destroy the mosaic effect after polishing, and it is recommended not to renovate.
3. If it is a reinforced floor, it cannot be refurbished. Because it has a layer of wear-resistant aluminum oxide on its surface, refurbishment will destroy its wear-resistant layer and aggravate the aging of the floor.
4. If the floor has been damaged, mildewed or deformed, it is generally difficult to carry out refurbishment and remedy if the situation is serious.
5. In order to ensure the quality of floor renovation, it is best to ask a more professional refurbished company or cleaning company to be responsible for the project. If conditions permit, professional supervision personnel can also supervise the construction.
Wood floor renovation can also get the home effect you want. Therefore, it is necessary to learn how to renovate the wooden floor. The above is the old wood floor renovation method and refurbishment notice that Xiaobian introduced to you today. It is over here. For more information, please continue to pay attention to the decoration home.
Bathroom Wall Light Fixtures,Waterproof Shower Light,Chrome Vanity Light,Bathroom Lights Above Mirror
NINGBO EASTKEY ILLUMINATE APPLIANCE CO.,LTD , https://www.dkledmirrorlight.com