How to use steel gratings in power plants
1. Common specifications of power grid steel gratings: Since power plants use steel gratings mostly for platform laying, usually no more heavy objects are placed, so the most commonly used specification of steel gratings is 303/30/100. The span of this specification is 1 At the time of meter, it can bear a weight of about 1.5 tons. As the span increases, the load-bearing capacity will gradually decrease. Therefore, it is necessary to pay attention to reasonable spacing of steel beam support in procurement.
2. Precautions for purchase of steel gratings by power plants: Steel gratings are a simple steel mesh product. The production is simple and widely used. The purchaser must select the appropriate steel grating products according to the actual conditions of use. The commonly used parameters are: Steel grid force direction and span, steel grid use environment and installation methods.
The ultrasonic level sensor integrates non-contact switch, controller and transmitter into one, suitable for small storage tanks. Ultrasonic liquid level sensor flexible design can be used in the integrated system or a substitute float switch, electrical conductivity and static pressure type sensor, and also suitable for the fluid flow control and chemical feed system of integrated application of ultrasonic liquid level sensor is widely used in all kinds of atmospheric storage tank, tank, small cans and small container, the pump lift stations, waste water storage tank, etc.
Ultrasonic Level Sensor,Ultrasonic Fuel Level Sensor,Ultrasonic Liquid Level Sensor,Ultrasonic Water Tank Level Sensor
Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com