Advantages of arc gear pump: The circular arc gear pump adopts the most advanced point in the world that the pump is in continuous contact with the gear, that is, double circular arc plus sinusoidal compound into tooth shape can completely eliminate the involute gear pump. Won the national major scientific and technological achievements project, and won the third prize of progress of science and technology by the State Education Commission. Circular arc gear in a continuous contact between the two meshing tooth profile, will not produce trapped oil phenomenon, completely solve the involute gear pump due to oil pump vibration, noise, bearing load increases and so on. Therefore, circular gear pump with efficiency, low noise, and has a good energy saving effect. Arc gear pump surface sticky coating principle and characteristics: In recent years arc gear pump surface sticky coating technology in China has been widely used in equipment maintenance, applicable to all kinds of materials, parts and equipment repair. Its working principle is to add molybdenum disulfide, metal powder, ceramic powder and fiber and other special filler adhesive, directly applied to the surface of materials or parts, so that it has a wear-resistant, corrosion and other functions, mainly for surface strengthening and repair . Its process is simple, convenient and flexible, safe and reliable, does not require specialized equipment, just a good glue coated on the surface of the cleaned parts to be cured after curing can often operate at room temperature, will not make the parts Produce thermal equivalent effect and deformation. Arc pump mold temperature machine introduced the best arc gear pump heating method should be hot oil heating. Continuous hot oil through the mold within the pipeline, from the internal mold heating, the mold to achieve the status suitable for production. Because HTF can not only heat, but also water-like cooling, the function like a heat exchanger, can maintain the mold temperature within a certain range, even if the production interruption can also be properly maintained mold temperature. Circular arc pump mold temperature machine using high thermal conductivity of the thermal media, so that in a very short period of time will die away from the excess heat. After setting the thermal equilibrium temperature, the mold temperature controller can automatically control its temperature within the minimum error and maintain the constant value.
150mm Wall Chaser Groove Cutting Machine
The 1700W 150mm Wall chasers are a twin bladed power tool which used to cut groove on brick, stone or concrete walls, perfect for electricians and plumbers, to lay wires or water pipes in the wall.
The 1700W 150mm Wall Groove Cutting Machine Chaser with Cutting Depth 10-40mm, cutting Width 14/19/29mm.
The Concrete Wall Cutting Machines With Spindle lock for easy blade change.
BTW, The Groove Wall Chaser Machine with Laser Function for cutting line straight.
The Wall Chaser work efficiency is much higher than the 5 blades wall chaser, and Less Dust with dust blower.
The 150mm Wall Cutting Machine is comfortable to use, due to anti-slip handle with soft grip cover.
150Mm Wall Chaser Groove Cutting Mchine,Best Electric Wall Chaser ,Brick Wall Chaser,Wall Cutting Machine
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com