Aluminum extrusion procedures and precautions
ã€China Aluminum Industry Network】1. Notices of the squad leader The production plan has a direct impact on the normal production situation. The key is to make the staff of the whole class understand the plan of the squad leader, in addition to the molds and aluminum bars in accordance with the production order. The first production, then what to produce, and then what to produce, so that production has clues. To use the plane die and splitter die, the special pad must be prepared before production, and the next set of upper die can not be pulled out from the die oven after the die set is released, and no special pad can be found, resulting in the die The drop in temperature will not cause pressure or damage to the mold, which will affect the planned completion time and increase production costs. When the mold is on the machine, it is necessary to check whether the mold number is the same as the production schedule. The mastering of the wall thickness, length, color, and order number is beneficial to increase the output and control the quality.
2. Precautions from the host: A qualified host must have a tacit understanding with the monitor. He can communicate with the monitor and clearly understand the monitor's production plan. When the monitor is not on site, he can direct production without causing downtime.
Only by familiarizing with the production plan, the operator can understand the skills of starting, and control the extrusion speed according to different surface treatment methods, sections and wall thicknesses to increase production and reduce waste production.
It is the sacred duty of the operator to operate strictly in accordance with the process and equipment operating procedures. The mechanical hand and the master cylinder must pay close attention when they enter, and the hand cannot leave the control switch of the console to prevent the extrusion stem from being pressed on the cake or the failure of the mechanical hand. The accident occurred.
3. Interrupted workers' operating procedures When an operator is interrupted, he or she must first check whether the blade is fixed, the rotating device, the safety device, and the buttons are normal.
Pay close attention to whether or not the discharge port profile is running smoothly. When the required length of the profile is reached, sawing is started.
Press the handle switch or the foot pad switch to press the saw blade to the discharge profile. During the sawing process, the saw blade must be moved in the same direction as the discharge speed. When the profile is cut off, the saw blade must be quickly removed from the profile.
The high power led pixel light can be used as the outdoor led lighting , building lights and madrix lighting . All of them are compatible of madrix software and Artnet Controller, dvi controller, sunlite LED Controller. As for the high power led pixel light, we have the 64mm diameter, 80mm diameter and 78mm diameter. All of them use the hgih power led. Therefore, they are the power led light fixtures. They can make auto-set dmx address and manual-set dmx address versions for your building lights project.
Photo show of High Power LED Pixel Light:
High Power Led Pixel Light,Outdoor Led Light,Building Led Pixel Light
Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com