Yichang Diamond Park Saw Blade Industrial Park wants to introduce supporting enterprises

Yichang, the second largest city in Hubei Province, has the largest diamond garden saw blade matrix production industrial park in China. Recently, the person in charge of the park said that the park is preparing to introduce supporting enterprises.
Yichang City's relatively low comprehensive cost, good investment environment, resource advantages and industrial base are considered to be favorable conditions for undertaking industrial transfer. The selected path is based on the advantages of resources such as hydropower, phosphate rock, iron ore and graphite, and actively undertakes excellent and strong enterprises with good growth and competitiveness, and promotes the optimization and upgrading of industrial structure. Relying on basic industries such as polysilicon and organic silicon, we will actively undertake supporting industries and promote the extension of the industrial chain to the high end. Relying on excellent and strong enterprises, we will guide enterprises with strong correlations to gather in groups, extend the industrial chain, and develop industrial clusters.
 

Threaded Rods

1. Correct selection of teeth

1) Before use, confirm whether the mechanical properties of the product meet the customer's requirements (such as the tensile strength of the Bolt and the safe load of the nut).

2) The length of the bolt should be selected properly, with 1-2 pitch exposed after tightening.

3) Before use, the thread should be kept clean.

2. How to use dental strips correctly

1) When tightening the teeth, pay attention to that the direction of force applied by the wrench should coincide with the axis of the screw, and do not tilt.

2) In the process of tightening, the force should not exceed the safety torque, and should be uniform. Try to use the torque wrench or socket.

3) Locking too fast will lead to locking, it is recommended not to use electric or pneumatic wrench.

4) Keep the thread clean. In order to ensure the smooth fit of screw and nut, it is recommended to put the product in a clean container and do not place it at will.

3. Standard of tooth bar maintenance

1) If there is slight damage to the removed tooth, screw and nut, the die and tap shall be used for repair.

2) The removed and repaired teeth, Screws and Nuts shall be maintained by means of oil bubble or lubricating oil, and shall be placed in order according to specifications, models and purposes.

4. Scrap standard

The bolts with obvious crack, broken thread, sliding, disorderly thread, screw tensile deformation, shear trace, etc. which can not be repaired by the on-site leader can be scrapped.

5. Specification parameters of tooth strips

Texture of material:

304/316

Product standard:

DIN975

Surface treatment:

turn into a good guy

Threaded Rods,Full Thread Rod Bolt,Hexagon Socketthread Rod Bolt,Stainless Steel Thread Rod Bolt

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com