Which reason is easy to damage the dust bag

2020-06-18 08:10:03
Filter the wind speed. The high filter air speed of the bag filter is the main reason for the damage of the dust bag. In recent years, some unit blind targets have reduced equipment costs and added profits. When the bag filter was designed, the filter speed was increased. There was no obvious response from users within a short time, but the service life of the filter bag was greatly shortened.
Dust Medium: The choice of material for the dust bag is determined by the nature of the dust in the dust, and it must be considered whether the dust can contain acids, alkalis, or substances that are more corrosive. According to the nature of the dust, the proper filter material can be used, so that the filter bag can normally adsorb dust without affecting its service life.
Application temperature: Accurate selection of dust bag that responds to the dust temperature is the hub of the filter bag. Assuming that the temperature is too high, the dust bag selected to exceed the normal operating temperature, filter bag will shorten the service life, serious will be destroyed within a short time. Therefore, when the filter bag is selected, it must be determined that the inlet temperature of the dust collector is good, and the dust bag in response is selected.
Product quality: The product quality of the dust bag is mainly special. In recent years, some small manufacturers use small sewing machines as processing equipment, and use inferior quality lines as raw materials for processing. Dust filter bag in the use of time is not long to open the line, crack, loss of bottom and other scenes. Although the bag size is slightly smaller, it can also be used. However, after adsorbing dust with a larger specific gravity, the use of a bag for a certain period of time will cause the appearance of lost bags.
Botou Jinzhu Environmental Protection Equipment Co., Ltd. specializes in producing pulsed bag dust collectors, cyclone dust collectors, wet desulfurization dust collectors, electrostatic precipitators and dust collector bags, dust collector skeletons, electromagnetic pulse valves, pulse control instruments, air cylinders, cloth bags hanging , Venturi tube, screw conveyor, unloader, bucket elevator and other dust collector accessories. Can also be based on customer requirements for non-standard design transformation.

ANSI B16.9 / B16.28 Hastelloy Pipe Fittings, Hastelloy C276 Seamless & Welded Pipe Fittings, Hastelloy UNS N10276, N06022, N10665 Butt weld Fittings, Elbow, Tee, Reducer, Bends, Hastelloy C22, B2 Pipe Caps, Cross  
Hastelloy Butt weld Pipe Fittings Specification:
Grade : Hastelloy C276 (UNS N10276), Hastelloy C22 (UNS N06022), Hastelloy B2 (UNS N10665), Hastelloy C-4 (UNS N06455)
Standard : ASTM B366 / ASME SB366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43
Size : Seamless 1/2″ – 10″, Welded 1/2″ – 48″
Form : Elbow, Long Radius Elbow, Short Radius Elbow, 90 Deg Elbow, 45 Deg Elbow, 180 Deg Elbows, 1D Elbow, 3D Elbow, 5D Elbow, Tee, Equal Tee, Unequal/Reducing Tee, Reducer, Concentric and Eccentric Reducer, End Cap / Pipe Cap, Stubend, Long & Short Stubend, Swage Nipple, Barrel Nipple, Reducing Nipple, Bend, Long Radius Bends, Piggable Bend, Equal & Unequal Cross.

Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Standard

Hastelloy C276

Hastelloy C22

Hastelloy B2

UNS

N10276

N06022

N10665

WERKSTOFF NR.

2.4819

2.4602

2.4617

AFNOR

–

–

–

JIS

NW 0276

NW 6022

–

GOST

ХН65МВУ

–

–

OR

ЭП760

–

–

EN

NiMo16Cr15W

NiCr21Mo14W

–


Hastelloy Fittings

Hastelloy Fittings,Hastelloy Tube Fittings,Hastelloy Pipe Fittings,Hastelloy Fitting

Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com