Waterproof surveillance camera cooling problem how to solve?
In order to change the situation that the infrared waterproof camera does not last long due to poor heat dissipation, a new generation of infrared waterproof cameras has made innovations and improvements in the light.
The new generation of infrared waterproof camera is a single lamp. Its one lamp is equivalent to 70-80 infrared lamps of the traditional camera. Its lamp is connected to the lamp through the lamp board (the lamp board is made of aluminum alloy). There is also a heat sink, through the chip to connect the shell, so as to get the heat-dissipating effect, its packaging material is using selenium rubber, because there is no broken layer, there will be no light failure, night vision effect is very good, life can reach 5 - Within 10 years, no attenuation is visible to the naked eye within 2 years.
Therefore, the new generation of infrared waterproof camera's heat dissipation is very good. If it is used, the shell is found to be very hot, indicating that its heat energy has been dispersed. This is a good thing. Good heat dissipation also extends life.
A new generation of infrared waterproof camera is integrated in many points, each dot matrix lamp can integrate 60-80 LED light crystals, the integrated volume is only the size of the nail cover, the volume of finished products will not be too large. Because the dot matrix lamp is a highly integrated LED, it is much smaller than other products.
The main advantage of the small size is that it is easy to use. If an infrared light source with a combination of dozens of individual LEDs is to be installed on a high-speed dome camera, the effect is conceivable. The light angle of ordinary products is generally 7°-10°, so a beam of light like a flashlight is formed. The angle of our luminous body can reach 180°. The entire space can be evenly illuminated indoors. The single LED's optical output is 5mw-15mw, while a dot matrix lamp's optical output reaches 800mw-1000mw, and the size has only one penny coin size. This shows that the dot matrix light is clearer, brighter and more distant than the similar products on the market.
Features
2. We have left to right, right to left or starts from the centre verions
3. Used in many occasions, for example work benches, drill presses, fishing boats, table saws, etc
4. Can be cut into wanted length with scissors
5. Numbers and scales are clear and big.
Self adhesive workbench ruler sticker was designed with original graphics. Excellent quality and easily read, we can stick these rulers nearly anywhere for convenient, quick measurements: work benches, drill presses, fishing boats, sewing tables, etc
About Sizes and Materials
The material of this tape measure is synthetic material, which is waterproof and tear-proof.
The standard widths of this is 16mm, and we can make wider size like 20mm and 25mm;
We have lengths like 152cm/60inches, 100cm/40inches, 60cm/24inches and 30cm/12inches
About Scales and Directions
For measurements, we have 3 versions:
Metric+imprial scales;
We have metric only item;
Only imperial ruler is available too
For direction of read,we have 3 kinds as well.
Read from left to right;
Read from right to left;
Read from centre.
Application
If you are tailor, designer of clothes, craftman, this sticker ruler is very helpful for sewing, get it from us to stick it to your work bench.
If you are fishing fans, get one stick to your boat to check the size of fish you get, it is very convenient!
40 Inches Adhesive Tape Measure,Silver Adhesive Tape Measure,Cheap Promotional Tape
Wintape Measuring Tape Company , https://www.wintapetape.com