The latest common faults in the passage gates such as swing gates and wing gates
2023-10-13 15:09:08
The swing gates of Hefei swing gates in Anhui, such as the swing gates of Anhui, are very common gates. They are used in a wide range of situations and are used at a high frequency. Pass gates such as swing gates and wing gates, if carefully maintained, generally do not present significant problems. However, a small probability event does not mean that it will not occur. The maintenance personnel know more about some of the latest troubleshooting methods and will bring a lot of convenience to daily maintenance.
1. After Anhui Swing Gate and Wing Gate Passes through the card, the swing door will not open the door, no response will occur, or it will not open automatically after power off. Check again to see if there is any drop in the signal line. Check the open on the main board. Whether the signal indicator has received the open signal.
2. After swiping, the gate opens, but the gate is not closed. This situation is usually not good for the middle anti-clip infrared. Before fixing the chassis, it must be determined that the infrared pair is good enough to open and close the door normally. If there is no good infrared, after power on, it will alarm. After swiping, please use the direction arrow to exercise.
3. After the channel gate is swiped, there is one open and one is not open. Check again if the sync line is connected. After the connection is guaranteed, if the motherboard that does not open has received an open signal, if not, check whether the wiring is dropped or if the plug on the motherboard is plugged in.
4. The working status of the swing gate, wing gate, etc. channel gate direction indications are: the green arrow points to the left, to the right, or to the red cross. If the direction indicates no response, or the direction of the indication is incorrect. You can switch to another test and try it with a good one. Check the wiring again.
Anhui Linbo Technology provides you with the best service Welcome to consult!
1. After Anhui Swing Gate and Wing Gate Passes through the card, the swing door will not open the door, no response will occur, or it will not open automatically after power off. Check again to see if there is any drop in the signal line. Check the open on the main board. Whether the signal indicator has received the open signal.
2. After swiping, the gate opens, but the gate is not closed. This situation is usually not good for the middle anti-clip infrared. Before fixing the chassis, it must be determined that the infrared pair is good enough to open and close the door normally. If there is no good infrared, after power on, it will alarm. After swiping, please use the direction arrow to exercise.
3. After the channel gate is swiped, there is one open and one is not open. Check again if the sync line is connected. After the connection is guaranteed, if the motherboard that does not open has received an open signal, if not, check whether the wiring is dropped or if the plug on the motherboard is plugged in.
4. The working status of the swing gate, wing gate, etc. channel gate direction indications are: the green arrow points to the left, to the right, or to the red cross. If the direction indicates no response, or the direction of the indication is incorrect. You can switch to another test and try it with a good one. Check the wiring again.
Anhui Linbo Technology provides you with the best service Welcome to consult!
Outdoor Lighting,Led Bollard Light,Landscape Spot Light,Led Garden Light
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com