Schwarde parking lock six protection
One of the Schwart parking locks six "proof":
The leading full-closed design, IP protection up to 68 (note: the highest level), can be completely immersed in water, the equipment runs freely, realizing the true sense of waterproof.
Schwart parking lock six anti-two "dust"
The Schwart parking lock uses a German imported seal to ensure complete dust prevention.
Schwart parking lock six anti-three "anti-pressure"
The main casing is made of high-strength pressure-resistant aluminum alloy and zinc alloy die-casting. It never rusts, has a service life of more than 10 years, and can withstand 5 tons of weight rolling. The swing arm baffle is made of special grade nylon (plus tempered fiber), which has strong toughness, strong impact resistance, no deformation, anti-aging and never discoloration.
Schwart parking lock six defense four "anti-invasion"
The parking space of Schwarde is locked in the parking space of the owner. The owner can enjoy the VIP service of the parking space. When other vehicles break in, the parking lock will automatically alarm and reset, effectively preventing the intentional or unintentional encroachment of other vehicles.
Schwart parking lock six defense five "anti-collision"
The swing arm of the Schwart parking lock is not mechanically stuck, in order to protect the vehicle from forcible entry.
First, the vehicle will not be damaged. After all, the price of the vehicle is much higher than the price of the parking lock;
Second, it will not damage the parking lock. The purpose of the Schwart parking lock is to cultivate a civilized parking habit instead of forcing the foreign vehicles, even if some poor people are forced to stop, Schwart Parking locks also ensure the safety of vehicles and parking locks.
Schwart parking lock six anti-theft "anti-theft"
The design concept of Schwarde parking locks reflects the humanized thinking, and every detail is considered by the owner. The position of the Schwart parking lock and ground mounting is located inside the main casing, and the cover can only be opened by the user with a key to realize the anti-theft of the parking lock.
There are five general body styles of ball Valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve-especially the casing that contains the ball itself-are manufactured and assembled. The valve operation is the same in each case.
In addition, there are different styles related to the bore of the ball mechanism itself.
Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.
Stainless Steel Ball Valves, Brass Ball Valves, Sanitary Ball Valves, Water Ball Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com