Precautions for the use of fireproof mud
Fire protection package and fire mud department should pay attention to communication
Poor communication is almost an old problem in every fireproof fire-breathing company. The more complex the fire-fighting enterprise is, the more difficult it is to communicate. Often many constructive opinions at the grassroots level have not been fed back to the top decision-makers, and they have been strangled by layers; the workflow of grassroots employees will always be stagnant because of the manager’s going out or not seeing. At the same time, in the process of communication, the communication of high-level decision-making can not be displayed in front of all personnel in the original appearance; there seems to always be a wall between the senior staff and the fire department staff, and it is impossible to communicate smoothly.
The continuous deterioration of communication has caused the top to learn about heroes, and the morale at the bottom has already vanished.
The importance of communication between fire prevention companies is unquestionable. The Japanese business god Matsushita Yukio once said: "Enterprise management used to be communication, now communication, and communication in the future." Now the management process of the enterprise is, in a certain sense, practical. It is the process of communication behavior.
Bad business communication?
The author finds that the situation of fire prevention enterprises varies widely, but the key to the cause of poor communication is the communication tools and the concept of fire prevention enterprises. In fact, communication is not difficult. As long as you are willing to spend three minutes to think and practice in seven minutes, you will find a solution.
Concerned about surprises
Label: Precautions for use of fireproof mud
Previous: Classification of low-voltage electrical appliances and the functions and characteristics of various accessories Next: Analysis of the sudden call of power outage equipment
Although there are many types of tapping screws, they all have the following similarities:
(1) are generally made of carbonized carbon steel (accounting for 99% of total production). It can also be made of stainless steel or non-ferrous metals.
(2) The product must be heat treated. Carbon steel tapping screws must be carbonized and stainless steel tapping screws must be solution hardened. In order to make tapping screws to meet the requirements of the standard of mechanical properties and performance.
(3) The product surface hardness is high, the core toughness is good. That is, "soft inside strong outside". This is a major feature of tapping Screw performance requirements. If the surface hardness is low, it can not be screwed into the matrix; If the core toughness is poor, a twist will break, can not be used. So "inside soft outside steel" is self-tapping screw to meet the use of performance, very important requirements.
(4) The surface of the product needs surface protection treatment, generally electroplating treatment. Some product surface must be treated by phosphate (photostatting), such as wall panel self - tapping screws for photostatting.
(5) Production by cold heading process. It is recommended to use high-speed cold heading machine and high-speed wire rolling machine or high-speed planetary wire rolling machine. High speed is emphasized here to ensure product quality. Only the head of tapping screw produced by high-speed machine is well formed and the thread quality is high.
Round head Tapping screw,hex tapping screw,flat head tapping screw,pan head tapping screw,truss head tapping screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com