JZK series DC current generator environment and use of matters needing attention
2023-03-26 12:14:48
JZK series DC high-current generator A new type of large current test device, with light weight, easy maintenance and operation. The current display and voltage display are all digitally displayed. There are over-voltage, over-current, and leakage maintenance devices inside. The total weight is only about 3/4 to 1/2 of the weight of the conventional riser, and the floor space is only about 1/2 of the original. Suitable for laboratory and field test movement is very convenient. It is an ideal equipment for industrial or mining enterprises to perform the up-flow or temperature rise test.
JZK series DC current generator environment:
1, the working power: 220V ± 10% 50HZ
2, the ambient temperature: -10 °C ~ 40 °C
3. There should be no place around the product that will seriously affect the gas vapor of transformer insulation, chemical deposition of dust, dirt, and other explosive media.
How to use the JZK series DC high current generator and precautions:
1. Connect the working circuit according to the electrical schematic. Transformer housing, console, etc. must be well grounded.
2. Turn on the power and the green indicator light on the console is on. Press the start button and the red indicator light is on, at which point the riser waits for a rise.
3. Rotate the potentiometer on the panel clockwise evenly. Pay attention to the output current indication on the console until the required large current. In order to ensure the test accuracy, a standard ammeter can be connected in series with the meter terminal.
4. During the test, if abnormal phenomena are found, the power supply should be cut off immediately and the cause must be ascertained before testing.
5. After the test is completed, the potentiometer must be set back to zero. Press the stop button to cut off the power supply and cut off the power supply before removing the test wiring to ensure safety.
JZK series DC current generator environment:
1, the working power: 220V ± 10% 50HZ
2, the ambient temperature: -10 °C ~ 40 °C
3. There should be no place around the product that will seriously affect the gas vapor of transformer insulation, chemical deposition of dust, dirt, and other explosive media.
How to use the JZK series DC high current generator and precautions:
1. Connect the working circuit according to the electrical schematic. Transformer housing, console, etc. must be well grounded.
2. Turn on the power and the green indicator light on the console is on. Press the start button and the red indicator light is on, at which point the riser waits for a rise.
3. Rotate the potentiometer on the panel clockwise evenly. Pay attention to the output current indication on the console until the required large current. In order to ensure the test accuracy, a standard ammeter can be connected in series with the meter terminal.
4. During the test, if abnormal phenomena are found, the power supply should be cut off immediately and the cause must be ascertained before testing.
5. After the test is completed, the potentiometer must be set back to zero. Press the stop button to cut off the power supply and cut off the power supply before removing the test wiring to ensure safety.
Top Lighting International (HK) Co., Limited , https://www.topled-group.com