Indoor wall paint classification and different brushing methods

Indoor wall paint commonly used low-grade water-soluble paint classification: Common is 106 and 803 paint. Such coatings have the advantages of being inexpensive, non-toxic, and convenient to construct. But the disadvantage is poor durability, easy yellowing discoloration. Colorful spray: Colorful spray is dispersed in water in the form of oil in water, once sprayed to form a variety of color patterns, elegant pattern, and a three-dimensional sense, and the paint oil resistance, alkali resistance are good, can be used to clean water. Paste interior wall paint: imitation porcelain chalk surface fine, smooth and clean, such as porcelain, and do not take off powder, non-toxic, odorless, good permeability, low prices. The lack of moisture resistance, scrub resistance is poor. Latex paint: At present, Nippon Paint (Nippon Paint is environmentally friendly and non-environmental), which is common in the market, is divided into high and low grades. High-end "Silitech" (Nippon Paint), imported green paint ICI (Dulux), imported GPM Master latex paint. This type of paint is characterized by mercy, looks like silk, usually brushing twice. Latex paint is characterized by strong hiding power, soft and durable color, easy construction, and cleaning. Many families use latex paint for decoration, and when choosing latex paint, they can choose according to personal preference through the color cards provided by the business. Each room has different lighting and area sizes and the effect is different. The bright colors of the brightly lit room paint appear bright, and the dark room paint colors appear dim. Brushing methods are different when brushing latex paint, the first step is to deal with the grass-roots level, the surface without oil, dust, mortar and other dirt, there is no hollowing, crisp, foaming, sand, holes, cracks defects. The surface must be dry and the surface moisture is below 60%. Then put the putty, level the wall, polish it with sandpaper, and then use the second putty to trim until it is flat. The yin and yang angles are dense and well-defined. If the room is moist, increase the amount of glue in the putty or add the primer one more time. Before painting the paint, the wall surface should be dry and smooth with a flat side view. The coating of latex paint should not be too thick or too thin during construction. If it is too thick, it will tend to fall and wrinkle and affect drying. If it is too thin, it will not be able to play the role of paint. The number of brushing passes is usually two times (monochrome). If you use color paint, you can brush it again. Water-soluble paints and latex paints are applied in the same way. They can be sprayed, rolled, brushed. The general room construction uses roller coating and brush coating. Use brush, brush, roller and other tools to brush. Colorful spraying is done with a spray gun, convenient and quick. Paste coating construction is to stir the paint thinly to the grassroots level, requiring scraping smooth, thickness of 0.3-0.5 mm, to be dry after the local dressing, and surface wiper, scraping wipe the surface smooth, smooth.

Three trees paint interior decoration paint paint latex paint room interior decoration

Flat Panels

Fuonce Lighting , https://www.fuonce.com