How to use electric water heaters to save more electricity?
Autumn is coming, and it’s time for the hot water heater to sell. If you want to save energy, how can you meet it at the same time? For the electric water heater with higher power, when it is not used, disconnect the power supply or plug in the power supply. ?
For water heaters, insulation technology is one of the most important technologies for joint energy, and insulation means energy saving and money saving. In the process of using, consumers often feel that power is cut off frequently to save power. In fact, this is a misunderstanding. A truly energy-efficient electric water heater does not require frequent power cuts because it has applied effective insulation technology. The method of using the electric water heater should be: if the water heater is used every day, then do not cut off the power supply; if it is used once for 3 to 5 days or longer, it is more energy-saving to use the power supply after power off.
In addition, it is necessary to select a suitable capacity of water heater according to the number of households and water habits, and do not blindly pursue large capacity, because the larger the capacity, the more power is consumed. In addition, when purchasing, you should also choose products with high quality, good reputation, good insulation effect and anti-fouling device.
When using it, you can save power by doing the following:
1. Adjust the thermostat to about 65 °C, and the power saving effect is best.
2. The use should try to avoid the peak time of electricity consumption. In summer, the temperature controller can be lowered to achieve the purpose of saving electricity.
3. It is best to use a shower for bathing, because the shower saves water and electricity more than the bath, which can reduce the cost by about 2/3.
4. For households that do not use electric water heaters frequently, it is recommended to start the electric heating 1 hour before use, and turn off after use, so that the electric energy consumption is at a minimum; if you take a bath at a relatively fixed time every day, you can buy computer control. The water heater product is completed with its timed heating function.
5. For the case of frequent use (usually the kitchen and the bathroom use a water heater at the same time, cooking, washing dishes, bathing with hot water) It is recommended to keep the water heater in the always open state, according to the frequency of use and the amount of hot water used. To adjust the hot water temperature. In addition, in the case of a small amount of use, the temperature can be lowered a little, and the amount of use can be increased a little, so that the electric water heater can save power. (He Wei)
Lockshield Radiator Valve,Wheelhead Radiator Valve,Angled Lockshield Valve,Radiator Valve And Lockshield
Ningbo Safewell Plumbing Co., Ltd. , https://www.safewellbrass.com