How to maintain plastic furniture? Extend the life of plastics
Plastic furniture is light and inexpensive, and is one of the most common types of furniture in our lives. It is a new type of furniture, available in many different types, but basically divided into two types: thermoset plastics and thermoplastics. The former is our common radio radio, car dashboard, etc.; the latter is like various household plastic parts, hoses, films or cards.
In modern furniture, this new material is pressed into a chair by a model, or pressed into various films, as a fabric of soft furniture, and a plastic hose of various colors is wound into a soft chair on a steel pipe. Because of its own characteristics, it is easy to be ignored, let alone well maintained. In fact, plastic furniture should also pay attention to maintenance, in order to extend the life of plastics and maximize the effectiveness of use. The plastic home has the characteristics of moisture-proof, light, and good cleaning. It has the advantages of water resistance, wear resistance, scrub resistance, etc. In terms of usual care and maintenance, there are the following methods:
Plastic chair
(1) Plastic furniture should be washed with ordinary detergent, be careful not to touch the master, do not use metal brush to wash.
(2) Plastic veneer furniture should not be exposed to direct sunlight and partial heavy pressure, and should not be heated to prevent the joint of the veneer from expanding and being dirty. The base of the veneer furniture is mostly fiberboard, which is easily exposed to moisture and is separated. It is necessary to pay special attention to waterproof and moisture proof. It can be coated with 1-2 layers of varnish on the reverse side of the substrate, that is, the veneer. If the veneer is found to be disengaged from its substrate, the joint should be cleaned with banana water or xylene, then reconstituted with a universal adhesive. After the glue is dried, it is closed with a varnish at the joint.
(3) PVC furniture, easy to age, brittle, preferably used indoors, not suitable for outdoor use. Avoid direct sunlight and near the stove, radiator. If there is a crack, the soldering iron can be softened and bonded. It can also be glued with banana water and glue dissolved in polyvinyl chloride.
(4) Polypropylene furniture, resistant to light and oil, but with poor hardness, should prevent collisions and sharp scratches such as sharp edges. If cracking can be repaired by hot melt method, no glue can be glued.
(5) FRP furniture has excellent performance and is suitable for indoor and outdoor applications. It has a long life and is sturdy and durable, but it is not easy to repair due to damage. It can be adjusted by screws and gaskets. Should be used to prevent overload and accidental fracturing and scratching.
Digital IZOD Impact Test Machine
Digital Izod Impact Test Machine,Digital Charpy Izod Impact Tester,Digital Izod Impact Testing Machine,Plastic Impact Testing Machines
Dongguan Best Instrument Technology Co., Ltd , https://www.dgbestinstrument.com