How to Accept the Quality of Tiles
Good quality tile components are all heavy and relatively solid. This is mainly due to the selection and proportioning of raw materials. The better the tile is, the greater the mechanical pressure during processing, so the weight is also heavier.
Brand Shop: Mona Lisa Tiles
Modern urban life is busy and stressful. A warm home can give everyone the most relaxing time. But how can you make your home warm and comfortable? As long as you master some tips, you can easily create pleasant homes. Xiaobian teaches you how to check the quality of the tiles.
First, identify the appearance of the product quality.
1, inch deviation size.
Take a brick to measure whether the length of its side meets the requirements, and then take a few blocks stacked together to compare whether the size is the same, the large size error will not only increase the difficulty of construction, but also affect the effect after the renovation. Small brick deviations are allowed within ±1 mm and large bricks are allowed within ±2 mm.
2, the size of the deformation.
Take two bricks side by side, depending on whether the side seam is small and straight, the straightness is good; then the two bricks are buckled together and the gap is small and straight, and the flatness is good. Look at the side of the tile for bumps, and the front side is flat and slightly convex. If the warping is serious, it will affect the future of the tile.
The size deviation and deformation size determine the size, straightness, and flatness of the plaster joints on the tiles.
Note: The dimensions of different types of mixed-laying, accessory bricks, waistline bricks and main bricks should be matched.
3, color size.
Due to the large number of purchases of wall tiles, if there is a significant color difference between multiple packages, the decoration effect is very much affected. It is necessary to compare the samples of all packages and observe the changes in the color difference. The color difference can not be selected.
4, the surface quality.
Observe whether the brick surface is delicate and even, and observe whether the product has obvious defects such as lack of glaze, spots, cracks, glaze bubbles, and ripples. The above defects must not be selected. Then use a few drops of colored liquid droplets to spread on the local surface. After a few seconds, wipe off the surface with a damp cloth. Observe whether the surface has residual color dots. The color dots often indicate that there are many pinholes, they are easy to hang dirty, and the quality of the glaze is not high; Can not afford, indicating that bricks have high water absorption and poor dirt resistance.
Second, the internal quality of judgment.
1, knock.
Lightly knocking (or tapping with a finger) the suspended tile with a stick, the sound clearly shows that the tile is not cracked, the degree of sintering is good, and the strength is high; if the sound is boring, there may be heavy skin or crack in the tile phenomenon: heavy skin When the brick is formed, the air in the material is not discharged, resulting in poor bonding between the material and the material, internal cracking, and invisible from the surface. Only listening to sound can identify.
2, handcuffs.
Good quality tile components are all heavy and relatively solid. This is mainly due to the selection and proportioning of raw materials. The better the tile is, the greater the mechanical pressure during processing, so the weight is also heavier.
3, dripping water.
A few drops of clear water on the back of the tile, observe the absorption rate, the faster the absorption, the greater the water absorption. In general, products with low water absorption, good sintering, high strength, good frost resistance, and good product quality.
4, scraping.
Scratches on the tile glazed surface with sharp objects. If the scratches indicate that the glazing difference is apt to make people slip, after the glaze on the surface is polished, the brick surface will not be cleaned.
Of course, the identification of technical performance can not only rely on sense, but also must see the manufacturer provides a recent effective quality inspection report certificate covered by the CMA chapter, technical compliance products have national certificates issued.
Recommended links: home decoration paving tiles to follow six major processes
Recommended links: Comprehensive interpretation of the purchase and construction of floor tiles
Tile paving tiles entrance decoration home decoration decoration decoration home
Zhejiang Heshuo Technology Co., Ltd , https://www.hosuocn.com