Hardware button products use small common sense
I-shaped button, hit nail
1). Suitable for use on denim and wash cloth
2). Usually the typework buttons and rivets are used in denim and washable casual wear, but because of the length of the nails, there are usually several specifications, which are generally selected according to the thickness of the denim and the use of several layers of cloth. The length of the bottom nail, so when the denim is used to hit the nail, be sure to provide the thickness of the denim and the materials used on several layers of cloth, according to the information to order the staples of the applicable length, otherwise the nails will be People feel that the deformation is inclined or the tension is not enough, easy to fall off, etc., wash leisure wear.
Four in one emergency button
1). Suitable for denim, wash cloth and windbreaker jacket
2). This type of button is widely used. It can be used in addition to knitted fabrics. It is recommended to open the fabric of the primer before the button is pressed. Otherwise, it will not achieve its best effect. If you can't debug the button machine in the best position, it will also cause the button to be deformed, loose, and out of focus.
Four in one and five claws
The common five-prong buckle is on the knitted fabric. The general tension will not cause it to fall off or pull the fabric, but it must have 2~3 layers of fabric. If there is special need, it can be explained in advance, and the production tension is loose. The five-prong button; the five-prong button does not need to be perforated in the fabric. This button is suitable for women's summer knitwear. The five-prong button on the winter wear requires tight tension; the five-prong four-button is also suitable for denim and wash. On the fabric, but not on the silk cloth.
Button processing in the later stage of clothing
Common clothing washing in the later stage will cause the buttons on the trousers to oxidize (only for oxidized plating buttons, such as: oxidized deep alloy color, oxidized light alloy color); ochre, green bronze, dumb å» will not Appear, but also pay attention to the pH of the wash water.
It is recommended to use buttons that match the mold.
The button is made of tailor-made molds, so you must use the button mold when you use the buttons. It is not recommended to use the button molds of other manufacturers; because many manufacturers produce buttons that may look good. Almost, but the effect is different. The buttons produced by different manufacturers' molds are different; it is recommended to use the button molds without other channels when playing large button products.
Concerned about surprises
Label: hardware button
Previous: The nine application scopes and three characteristics of power tools Next: What products mainly include building materials hardware?
Packing & Finishing Panels In Perth
Packing & Finishing Panels In Perth,Packing And Finishing Panels,Glossy Panel,Finishing Panels For Sale, Wall End Panel Kitchen
Fully assembled – No assembly required
Save time and Installation Costs
Designed for easy installation
FSC approved, eco-friendly E1 quality board
Durable white high gloss finish on all sides
Constructed from a high moisture resistant 16mm board
Painted with a polyurethane 2-pack High gloss finish
Bright white interior
Soft closing drawers and doors
Quick release hinges to all doors and full extension drawer runners to all drawers
Stylish chrome handles
Solid 16mm backing board and drawer bases
Top-quality premium cabinet
Packing & Finishing Panels In Perth,Packing And Finishing Panels,Glossy Panel,Finishing Panels For Sale, Wall End Panel Kitchen
Duraplex Limited , https://www.fsduraplex.com