Fruit trees are applied to organic fertilizers.
Second, the unfertilized organic fertilizer is harmful to the fruit trees after being applied
1. Burning Roots Most of the farmyard manure comes from animal manure and is rich in organic matter. When these organic fertilizers are not decomposed, their nutrient status is slow-acting and cannot be directly absorbed and utilized by the roots of fruit trees. If they are applied, in the process of underground decomposing, heat is easily generated to cause root burns (commonly known as "burning roots"). Cause root rot.
2, nutrient release and tree body need to be unsynchronized After the application of unfertilized organic fertilizer in autumn, due to the low soil temperature in autumn and winter, coupled with the orchard soil layer, these organic fertilizers take a long time to maturation in the ground. According to the author's excavation survey of the orchard that had not been applied with organic manure three years ago, it was found that some of the manure was still in its original state. In the spring of the second year, although the ground temperature has gone up, the general rains in the main apple producing areas in northern China are less than normal, and the rate of application of organic fertilizers is still very slow. At this time, the trees need a lot of nutrients to supply the fruiting results of the trees. The limited organic nutrients released by the slow-to-ferment organic fertilizer simply cannot meet the needs of the tree. At the same time, in the process of decomposing, the microorganisms also consume some of the original nutrients (such as nitrogen fertilizer) in the roots of the fruit trees, and the trees often show malnutrition. After entering the summer and autumn of the second year, with the increase of rainfall, the ground temperature rises rapidly. In the past year, the speed of ripening of Mingba was obviously accelerated, releasing more organic nutrients that can be absorbed by the trees, resulting in trees. The growth of the body is accelerated, a large number of strips are produced, the fruit is poorly colored, the vegetative growth is excessive, and the flower bud differentiation ability is poor, so that a large amount of organic nutrients are wasted and the nutrient supply of the tree is imbalanced.
3, extremely easy to attract underground wintering pests Unfertilized organic fertilizer because of a large amount of animal organic matter, it has become an ideal wintering place for many fruit tree pests, especially easy to attract all kinds of chafers (蛴螬), peach small heartworm, The ruler, the boat-shaped caterpillar, the pear flower net, etc. are extremely unfavorable for the pest control in the coming year.
3. When the organic fertilizer is piled up and used in the unfertilized organic fertilizer, the composting site should be selected in the place of leeward, sunny, and high-lying areas, and the agricultural film or cement floor should be placed on the compost floor. The animal feces in the agglomerate is broken, the straw is crushed and crushed below 5 cm, and about 3% of the superphosphate and the manure are mixed and then piled up. The addition of superphosphate is mainly to prevent the loss of nitrogen in organic fertilizers and to increase the activity of microorganisms. After the pile is completed, the surface is flattened with a spade, covered with mud for about 10 cm thick or covered with agricultural film, and the surrounding is pressed tightly to create an oxygen-deficient environment, so that it can be decomposed as soon as possible. The farmyard can be fermented in about 60 days. When the color of the organic fertilizer changes from the original gray to purple and black, the texture is loose and there is a foul smell, it means that it has been decomposed and should be applied to the orchard in time. When fully septic sheds are applied to the orchard, the outer part of the canopy should be selected for vertical projection, and the fertilization ditch with a width of 30-40 cm and a depth of 30-40 cm should be excavated, and the organic fertilizer and the appropriate fertilizer (nitrogen and phosphate fertilizers) should be After the topsoil is evenly mixed, it is put into the bottom of the fertilization ditch, and finally covered with the bottom layer of the soil that has been turned out, or applied to the whole garden, and then turned into the soil layer after being applied.
Source: Shaanxi Science and Technology News
Normally, 520nm LED are widely used in back light and most of the LED lighting project.
The color of 520nm Green LED will be more yellow than the Cyan LED.
520nm led is a green LED. Common green LEDs are like: green 515nm LED, green 520nm LED, green 525nm led, green 530nm led, green 535nm LED, green 540nm LED, green 545nm LED, green 550nm LED and so on.
For the Through-hole Light Emitting Diode 520nm green LED,
we
can customize the shape, the lighting angle, the number of emitting
source, the flat pin LED and braided LED. Such as: 5mm green 515nm LED,
5mm green 520nm, 5mm green 525nm LED, 5mm green 530nm LED, 5mm green 535nm LED, 5mm green 540nm LED, 5mm green 545nm LED, 5mm green 550nm LED. 3mm green 515nm LED, 3mm green 520nm, 3mm green 525nm LED, 3mm green 530nm LED, 3mm green 535nm LED, 3mm green 540nm LED, 3mm green 545nm LED, 3mm green 550nm LED.
There are many other shapes for your choose. Customized green LED are available
For the SMD LED 520nm LED,
we
can supply dual-chip green LED, three-chip green LED, multi-chip green LED, high voltage LED, flashing green LED and variety of size
SMD LED. For instance: 3528 SMD green 515nm LED, 3528 SMD green 520nm
LED, 3528 SMD green 525nm LED, 3528 SMD green 530nm led, 3528SMD green 535nm led, 3528 SMD green 540nm LED, 3528 SMD green 545nm LED, 3528 SMD green 550nm LED. 2835 SMD green 515nm LED, 2835 SMD green 520nm LED, 2835 SMD green 525nm LED, 2835 SMD green 530nm LED,
2835 SMD green 535nm LED, 2835 SMD green 540nm LED, 2835 SMD green 545nm
LED, 2835 green 550nm SMD LED.
There are also have many other shapes to choose, like the
5050 SMD green LED, the 5730 SMD green LED ect. You can choose any one
of them for your requirement.
We will do the High temperature resistance testing and 10 hours ageing treatment before the product out off the factory, which can ensure the stability of each product.
Our LED products have 5 year warranty.
We are the best supplier for your light-emitting diode.
Normally, 520nm LED are widely used in back light and most of the LED lighting project.
The color of 520nm Green LED will be more yellow than the Cyan LED.
520nm led is a green LED. Common green LEDs are like: green 515nm LED, green 520nm LED, green 525nm led, green 530nm led, green 535nm LED, green 540nm LED, green 545nm LED, green 550nm LED and so on.

We will do the High temperature resistance testing and 10 hours ageing treatment before the product out off the factory, which can ensure the stability of each product.
Our LED products have 5 year warranty.
We are the best supplier for your light-emitting diode.
520nm LED,525nm LED,530nm LED,520nm Green LED,525nm Green LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com