FRP Meniscus Top Grating for Oil Platforms, and Others

Product Description: 

Concave top FRP grating also known as meniscus top fiberglass grating, which has a concave surface that provides slip-resistant footing for a wide range of industrial uses. Wet and oily conditions are best suited for the meniscus top FRP grating because of the security it provides.For most applications, the meniscus top fiberglass grating is the standard coating for all molded gratings because it performs well in the case of many common spills.
  

Why Concave surface grating? 

-----Concave coating applies a very thin substrate to the surface and the final bonding process helps it to stay hydrophobic and take most oils, waters and other liquids away from raised gratingelements, so your staff can maintain their grip.

The best advantage of using meniscus top fiberglass grating is that you'll get all the standard benefits for FRP grating, including:

Advantages: 

1.Light weight, FRP is up to 70% lighter than steel
2.High Strength, a high strength-to-weight ratio when compared to traditional materials
   like metal,wood.
3.Corrosion resistance in the harshest environment and chemical exposures,
   thus less maintenance.
4.Slip resistant
5.Long service life
6.Low installation cost
7.Impact resistant Electrically & Thermally Non-conductive
8.Fire retardent
9.Ergonomic

FRP Gratings can be strong enough to carry vehicle  loads while weigning less than steel gratings.

------The chief competitor to Concave top molded grating is an integrally applied grit top. These grit tops adopt a variety of materials such as quartz and can be applied integrally. They provide significant resistant to slips but may not perform as well in oily situations.

While Meniscus top fiberglass grating has a normal amount of corrosion resistance for an FRP product,though some integrated competitors and alternatives may have a higher degree of resistance. It tends to perform as well as other coatings when maintaining the electrical and thermal conductivity resistances.

By pairing a meniscus top FRP grating with exceptional resins including Isophthalic Polyesters, the meniscus coating will be able to meet the demands of many harsh environments.

Related Sizes:
 
And we could provide customerized design service. So please feel free to contact us for specific design. 

Qualified raw materials ensure the excellent quality of MACHS FRP grating. All of the raw materials are from carefully selected advanced suppliers.
About Mach's:



Our Workshop:




Our Certificates:



Our Warehouse:

Our Packing and delivery System: 

Before delivery, we shall conduct FAT (visual inspect & load test) and  provide relative reports. If required by our customer, there shall be third party, and provide reports like ABS, SGS.

Report List:

1. ISO 9000 ABS Quality Evaluations
2. ABS Design Assessment
3. ABS Manufacturing Assessment
4. ASTM -E 84 Moulded Grating 1 class 15
5. ASTM -E 84 Moulded Grating 1 class 10
6. ASTM -E 84 Moulded Grating 1 class 25
7. UL -94 V -0
8. ROSH
9. EN 13501+A1 Fire classification

We provide corrugated boards, wooden package or steel pallet package. Or we can pack according to your 
request. 
Besides, check the package carefully and ensure that the package meet our customer's requirements. Take photos and send to customer for approval.
We promise all the products shall be delivered to your site intact without any damage. Believe in us.  

Our Services: 

Pre-sale service: 
1. Custom design 
2. Product Consulting
3. Provide samples within 7 days

After-sale Service; 
1. Short Delivery time
2. Installation Instructions
3. 24h Consulting Service
4. Quality Compliants solving 

Our Promise: 

1. All items shall be furnished only by manufacturers having a minimum of ten (10) years experience in the design and manufacture of similar products and systems. Additionally, if requested, a record of at least five (5) previous, separate, similar successful installations in the last five (5) years shall be provided.
2. We shall offer a 3 year limited warranty on all FRP products against defects in materials and workmanship.
3. We shall provide proof, via independent testing less than six months old, that materials proposed as a solution do not contain heavy metals in amounts greater than that allowed by current EPA requirements

How we deal with customers' complaints? 

1.Accept complaints from our customers
2. Our sales team and QC team shall contact customers and investigate
(Analysis and fast reply within 24 hours)
3.Communicate and customers provide defect products' pictures or vedios,
or if necessary, go onsite for investigation
4.Find out the root cause and provide solutions and reports to our customers
5.Confirm customer's loss and provide qualified products ASAP and close the case

We promise we shall treat every customer's complaint carefully ! 

FAQ: 

Q: Are you a trading company or a manufacturer?    
A: We are a manufacture as you can see our workshops' photos herein.
Q: What is your payment term?    
A: T/T, L/C, paypal, etc can be accepted.
Q: Can I place sample order first?      
A: Yes, we can provide sample first for your check.
Q:What kind of trade terms can you do?      
A: FOB, CIF, EXW, etc can be accpetd. 
Q: How to get to your factory?      
A: In nantong, we have Xindong Airport. If there is flight, you can first come to Xindong Airport, and then we shall go there and accept you. If there is not flight,  it is possible to go to Shanghai Airport (Hongqiao, Pudong are both okay), and then we shall pick up you there. 
Q: What features should I consider when choosing FRP gratings?      
A: You should consider your specific application in regards to environment, span, open area, impact resistance and layout utilization.
Q: Why is molded grating more corrosion resistant than pultruded grating of the same resin type?      
A: Resin protects the glass fibers from corrosive chemicals. Molded grating has 65% - 70% resin whereas pultruded grating has only 30 - 35% resin. Secondly, molded grating is one-piece        homogeneous construction whereas pultruded grating is assembled into panels. The corrosion   barrier of the pultruded pieces are compromised when holes are drilled into components for panel assembly.   
Q: What is the leading time for the samples?      
A: Normally 7 to 10 working days.
Q: What is the leading time for bulk order?      
A: Normally 30 to 40 working days.
Q: Do you have the MOQ for the products?      
A: No, we do not have any MOQ, 1pcs, 1 square meters is available for us. 
Q: Do you have detailed and professional installation manuals?      
A: Yes, we have. And we shall provide along with the shipping.

Contact Us: 



For more information, please feel free to contact us and welcome to visit our website: www.chinamachs.com !

Aluminum Mirror

Aluminum Mirror,Safety Mirror Glass,Double Coated Aluminum Mirror,Aluminum Mirror Sliver Mirror

SHANDONG TOP LEADER GLASS CO.,LTD , https://www.topleaderglass.com