Electric faucet emergency troubleshooting and daily use
1. First look at the power supply, check it with an electric pen.
2. Plug the electric faucet power plug, use the electric pen or a screwdriver with a good insulating handle to make the two contacts touch-connect. If there is an electric spark, the electric faucet is good, not hot, the water pressure is not enough, adjust two The gap between the contacts, but the contact gap is not adjusted by the factory adjustment; if there is no electric spark and the indicator light is not bright, it means that the thermal protection is broken, and the thermal protection can be replaced; if there is no electric spark When the indicator light is on, the heating tube is burnt out. The heating tube must be replaced. Special tools are needed to replace the heating tube.
3. Single use of high temperature hot water should not be too long.
4. To prevent freezing, do not use when freezing, be sure to cut off the power.
5. It is forbidden to use it in an inverted installation.
Bathroom Faucet,Basin Faucet Bathroom,Bathroom Mixer Tap,Wall Mount Mixer Tap
kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets.com