Eight principles of safe construction of stone protective agent
Stone protective agents can be divided into different types according to different classification methods. Whether it is solvent-based protective agent or decorative protective agent, it should be safe when used. The safe use and safety of the protective agent also need to be paid attention to. The following are some common safe construction methods.
1. First, protective equipment should be worn when the protective agent is applied.
2. Secondly, when the protective agent is used, it should be kept clean. After the protective agent is found to be contaminated, it should be filtered in time. If the pollution is serious, it should be replaced.
3. Again, keep the tools clean during construction and clean them when necessary to prevent poor protection.
4. It is worth reminding that even if there is a greater degree of certainty, a small sample test should be carried out before large-area construction.
5, solvent-based protective agent, should avoid the use of soaking method for construction, storage should be kept away from fire and high temperature.
6. Face-type protective agent, when used alone for bottom construction, should be tested for adhesion to cement mortar.
7. When protecting the construction, the solvent-based protective agent should be kept away from the fire source and pay attention to ventilation.
9. When the protective agent is accidentally imported or eyed, it should be cleaned with water in time. If the situation is serious, it is necessary to go to the hospital for ambulance.
ZHEJIANG HESHUO TECHNOLOGY CO.,LTD , https://www.hosuocn.com