Double Acting Hydraulic Oil Cylinder for Engineering Machinery Crane
Features & Benefits:
1. Made from special high strength steel to reduce overall weight.
2. Heavily chromed and polished cylinder piston rods for longer seal lift.
3. Heavy structure angle rear hinge for superior strength.
4. Pre-installed, integral body automatically positions itself, stores securely out of the way when not in use.
5. Capacity range: according to the type and model of the hydraulic cylinder.
6. Precision machined steel head and cap provides close concentricity and accurate alignment between piston, tube, piston rod and rod bearing.
7. Adjusting forms:Â regulated type.
8. Specification:Â could be customized.
9. Color:Â red, yellow or painted according to your need.
10. Size: customized. Â
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
Piston seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
 Application:
Hydraulic cylinder is most important in Engineering Machinery hydraulic system, we have various kinds of Engineering Machinery Hydraulic Cylinder which perform well to be as pushing cylinder ,turning barrel cylinder ad sliding cylinder, they are reliable and working stably.
Â
| Application | Various Engineering Machinery Projects |
| Material of cylinder tube | alloy steel, stainless steel, carbon steel |
| Coating | All tubes are chrome plated |
| Working pressure | 10MPa-36MPa |
| Bore size | 100mm-2550mm |
| Color | Any color, if you needed |
| Mouting Type | Earring-tunnion, double tunnion, double earring (eye end) |
| Plunger | 20#, 45# steel with high frequency quenching |
| Certification | ISO9001:2008, SGS, TS16949 |
| Warranty | One year |
| Working temperature | -30° C to 80°C |
| Stroke | 500-3500mm |
| Package | Shrink film, pallet, plywood case, carton box |
| Main export market   | USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore |
| payment terms | T/T, L/C, D/A, D/P AND SO ON |
| Delivery time | 30 days after down payment |
Â
 Engineering machinery hydraulic cylinder HSG series double acting single piston rod hydraulic cylinder, according to the use function is divided into : steering cylinder, boom cylinder, lifting cylinder, tilt cylinder and quick change cylinder, has the characteristics of connecting mode diversification and buffer device etc.. maining machinery and fire engines, sanitation vehicles and other special vehicles.
               The detailed information for HSG series hydraulic cylinder              Â
| HSG series hydraulic cylinder for construction machinery | |||||
| Â models | Â stroke (mm) |
 bore (mm) |
 the diameter of rod (mm) |
push (KN) |
pull (KN) |
| HSGK01-160/90E-131 | 715 | 160 | 90 | 321.7 | 219.9 |
| HSGL01-100/60E-131 | 1200 | 100 | 60 | 125.66 | 87.65 |
| HSGK01-80/50E-131 | 700 | 80 | 50 | 101.79 | 70.37 |
| HSGK01-80/50E-131 | 640 | 80 | 50 | 101.79 | 70.37 |
| HSGK01-80/50/E-131 | 550 | 80 | 50 | 101.79 | 70.73 |
| HSGL01-80/50-131 | 500 | 80 | 50 | 80.43 | 54.98 |
| HSGL01-80/50E-131 | 440 | 80 | 50 | 80.43 | 43.41 |
| HSGL01-63/35E-131 | 200 | 63 | 35 | 50 | 34.5 |
| HSGL01-63/35E-131 | 300 | 63 | 35 | 50 | 34.5 |
| HSGL01-50/28E-131 | 140 | 50 | 28 | 31.42 | 21.5 |
Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.
Send us your drawings and the main parameters:
A.
1. bore sizeÂ
2. stroke length
3. rod diameter
4. mouting typeÂ
5. mouting length
6. paint color requirement
B. the pruduction application description details
1. type of machine (loader, steer loader, excavator and ect.)
2. type of function (hoist, swing, steering, and ect.)
3. type of struction (piston, telescopic)
4. single or double actingÂ
5. operating pressure
 Â
Quality Control:
1. External Inspection: Purchased Item Inspection, Outsourcing Item Inspection
2. Process Inspection: First Inspection, Random Inspection, Handover Inspection
3. Final Quality Inspection: External Dimensions Inspection, 100% Hydraulic Test
4. Type Inspection
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.
FAQ:
1.Are you a manufacturer?
We are professional manufacturer in hydraulic. We will provide competitive price.
2.What is your warranty?
Our products are all available for one-year free warranty and product lifetime consulting service.
3.How to ship your products?
We are transported by sea, by air or by international express.
4. Do you support OEM service?
Yes. OEM service is available.
5. Is your design reasonable?
We have professional R&D team with rich design experience.
Â
Features & Benefits:
1. Made from special high strength steel to reduce overall weight.
2. Heavily chromed and polished cylinder piston rods for longer seal lift.
3. Heavy structure angle rear hinge for superior strength.
4. Pre-installed, integral body automatically positions itself, stores securely out of the way when not in use.
5. Capacity range: according to the type and model of the hydraulic cylinder.
6. Precision machined steel head and cap provides close concentricity and accurate alignment between piston, tube, piston rod and rod bearing.
7. Adjusting forms:Â regulated type.
8. Specification:Â could be customized.
9. Color:Â red, yellow or painted according to your need.
10. Size: customized. Â
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
Piston seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
 Application:
Hydraulic cylinder is most important in Engineering Machinery hydraulic system, we have various kinds of Engineering Machinery Hydraulic Cylinder which perform well to be as pushing cylinder ,turning barrel cylinder ad sliding cylinder, they are reliable and working stably.
Â
| Application | Various Engineering Machinery Projects |
| Material of cylinder tube | alloy steel, stainless steel, carbon steel |
| Coating | All tubes are chrome plated |
| Working pressure | 10MPa-36MPa |
| Bore size | 100mm-2550mm |
| Color | Any color, if you needed |
| Mouting Type | Earring-tunnion, double tunnion, double earring (eye end) |
| Plunger | 20#, 45# steel with high frequency quenching |
| Certification | ISO9001:2008, SGS, TS16949 |
| Warranty | One year |
| Working temperature | -30° C to 80°C |
| Stroke | 500-3500mm |
| Package | Shrink film, pallet, plywood case, carton box |
| Main export market   | USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore |
| payment terms | T/T, L/C, D/A, D/P AND SO ON |
| Delivery time | 30 days after down payment |
Â
 Engineering machinery hydraulic cylinder HSG series double acting single piston rod hydraulic cylinder, according to the use function is divided into : steering cylinder, boom cylinder, lifting cylinder, tilt cylinder and quick change cylinder, has the characteristics of connecting mode diversification and buffer device etc.. maining machinery and fire engines, sanitation vehicles and other special vehicles.
               The detailed information for HSG series hydraulic cylinder              Â
| HSG series hydraulic cylinder for construction machinery | |||||
| Â models | Â stroke (mm) |
 bore (mm) |
 the diameter of rod (mm) |
push (KN) |
pull (KN) |
| HSGK01-160/90E-131 | 715 | 160 | 90 | 321.7 | 219.9 |
| HSGL01-100/60E-131 | 1200 | 100 | 60 | 125.66 | 87.65 |
| HSGK01-80/50E-131 | 700 | 80 | 50 | 101.79 | 70.37 |
| HSGK01-80/50E-131 | 640 | 80 | 50 | 101.79 | 70.37 |
| HSGK01-80/50/E-131 | 550 | 80 | 50 | 101.79 | 70.73 |
| HSGL01-80/50-131 | 500 | 80 | 50 | 80.43 | 54.98 |
| HSGL01-80/50E-131 | 440 | 80 | 50 | 80.43 | 43.41 |
| HSGL01-63/35E-131 | 200 | 63 | 35 | 50 | 34.5 |
| HSGL01-63/35E-131 | 300 | 63 | 35 | 50 | 34.5 |
| HSGL01-50/28E-131 | 140 | 50 | 28 | 31.42 | 21.5 |
Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.
Send us your drawings and the main parameters:
A.
1. bore sizeÂ
2. stroke length
3. rod diameter
4. mouting typeÂ
5. mouting length
6. paint color requirement
B. the pruduction application description details
1. type of machine (loader, steer loader, excavator and ect.)
2. type of function (hoist, swing, steering, and ect.)
3. type of struction (piston, telescopic)
4. single or double actingÂ
5. operating pressure
 Â
Quality Control:
1. External Inspection: Purchased Item Inspection, Outsourcing Item Inspection
2. Process Inspection: First Inspection, Random Inspection, Handover Inspection
3. Final Quality Inspection: External Dimensions Inspection, 100% Hydraulic Test
4. Type Inspection
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.
FAQ:
1.Are you a manufacturer?
We are professional manufacturer in hydraulic. We will provide competitive price.
2.What is your warranty?
Our products are all available for one-year free warranty and product lifetime consulting service.
3.How to ship your products?
We are transported by sea, by air or by international express.
4. Do you support OEM service?
Yes. OEM service is available.
5. Is your design reasonable?
We have professional R&D team with rich design experience.
Â
Professional in producting carbon brush for power tools, automobile & motorcycle and so on.
Supplying all kinds of hardwear tool accessories, like spring, brush holder.
Speciallying carbon brush with 30-year manufacturing experience.
Supplying all kinds of packings such as Loose polybag packing, Blister card packing, Color bag packing, Color polybag packing, Skin packing,etc.
Providing one-stop service, giving customer the whole solution: selecting suitable material grade→producting→designing the packing→inspection→deliverying.
Density, resistivity, hardness, current desity is tested during production to assure every products's quality
We possess a complete set of advanced and special equipment for production, inspecion, which including grinding, blending, rolling, seconding grinding, forming, sintering and graphitizing.
Crown Carbon Brush Record Brush, Crown Carbon Brush Transistor,Crown Carbon Brush,Carbon Brushes For Crown,Crown Power Tools Carbon Brush,Carbon Brush For Electric Crown
Haimen Hailing Carbon Industry Co., Ltd. , https://www.carbonbrush-hl.com