Domestic bathroom hardware accessories "short-lived" mystery

In recent years, the most complaints in the bathroom industry are hardware accessories. The lack of sufficient attention from enterprises is also one of the main reasons for the low pass rate of sampling of bathroom hardware fittings over the years. According to industry sources, at present, domestic sanitary ware products can be compared with international brands in terms of product appearance, function setting and overall quality. The only regret is that there is still a certain gap in service life. For bathroom products, the key factor that determines the service life is hardware and water.

Bathroom hardware is generally divided into three components. That is, the base (fixed parts), connectors, functional parts; one side of the base is close to the wall or board surface, this surface is generally not surface treatment. As long as you look at the color of it, you basically know what kind of material you are using. The connectors are basically surface-treated. You can only use the following methods; most of the functional parts are mainly tubular and rod-shaped materials. If the tube, its inner wall can generally be seen. Because of the different proportions of raw materials, the weight of objects with the same volume is different (except light materials). At present, bathroom hardware pendants on the market mainly include the following materials:

1, stainless steel (now relatively few products on the market). Advantages: Not afraid of wear, no rust. Disadvantages: Single style, general workmanship (and it is difficult to guarantee the quality of stainless steel).

2, copper chrome plating (now on the market basically based on such products, the rod is divided into hollow, solid two, electroplating is divided into two kinds of light and frosted). (1) Hollow copper chrome plating (mostly round bars, and generally rectangular bars): Advantages: Many styles and moderate prices. Disadvantages: fear of wear and tear, the best plating will fall off under the humid environment all the year round, some small manufacturers in order to keep the price down, the plating layer is very thin, will not take long to electroplating will fall off.

Deformable, regular manufacturers generally do not have this problem! However, the tubes used by some manufacturers are relatively thick at first glance, but the walls of the tubes are very thin, and their use is broken (it is recommended that you do not press hard when you buy them, but do not bend easily). (2) Full copper solid chrome plating (usually square tube, some to prove to be solid, specially twisted a few flowers at both ends of the rod): Advantages: fine workmanship, relatively thick plating layer, strong and durable. Disadvantages: The price is high, the style is not as hollow.