Does the new house's gray walls require eradication?

The top surface and wall surface treatment shall be constructed as follows:

(1) Check whether there is emptying phenomenon in the wall, if there is promptly notify the owner to promptly coordinate with the developer to solve and quickly repair, so as not to delay the construction period.

(2) Eradicating the top of the original building and the wall surface to avoid stratification after the construction is completed. Each time “change face” is to carry out a construction process (removing the original structure and then laying a grid cloth can reduce the cracking of the wall surface. ).

After the top surface and the wall surface are checked and confirmed, the environmental protection glue is still used to roll the wall surface to ensure the solidity of the base layer.

The base layer is not strong, or the thickness of the ash is too thick, it will cause the white ash to crack and even drop.

Decoration construction knowledge new house

Name: Acrylamide

Chemical formula: C3H5NO

CAS accession number: 79-06-1

Melting point: 82-86 degree C

Appearance: white crystalline solid, no smell

Nickname: 2- 050-01[6] acrylamide; acrylamide; acrylamide aqueous solution; AM; 2- acrylamide

Molecular weight: 71.08

EINECS accession number: 201-173-7

Density: 1322 g/cm3

Flash point: 138 ~ C

Boiling point: 125 degrees C

Water soluble: soluble in water, ethanol, ether, acetone, insoluble in benzene

Acrylamide

Acrylamide Polymer,Solid Acrylamide,Acrylamide Copolymer,Acrylamide Solid

Xi'An Lanzhiguang Fine Material CO.Ltd , http://www.lanzhiguangchem.com