CNC cutting machine daily use three defense tips
2023-11-08 20:12:03
The CNC cutting machine is a machine that uses the digital control mechanical part to draw according to the graph drawn by the computer, and cuts the metal plate according to the figure. Compared to the previous profile cutting, car cutting and manual cutting, the cutting efficiency is not only in the cutting speed, but also in the cutting speed. On the cutting effect is still operational, CNC cutting machine has a clear advantage! In the operation of the CNC cutting machine, there are many details that need attention, and these small problems often affect the cutting effect. Wuhan Yide Welding Equipment Co., Ltd. summarizes some tips for using CNC cutting so that users can master the use in actual operation:
First, to prevent electric shock 1. When the power or the machine is running, please do not touch the electrical cabinet and any electrical components within the console.
2. Do not operate any switch knob with wet hands to prevent electric shock.
3. It is strictly forbidden to check the line or replace the electric element with electricity. 2. To prevent damage 1. When the cutting machine is running, pay attention to whether there are people or other objects in front, so as to avoid injury.
2. After each cutting is completed, the torch should be raised to a higher position so as not to hit the steel plate and damage the cutting torch.
3. Mechanical maintenance personnel should ensure that the machine is at a standstill during maintenance. And hang up warning signs to prevent the sudden operation of the machine and human accidents.
Third, to prevent fires 1. Cutting machine use of raw materials for flammable gases such as acetylene, propane, liquefied gas and so on. It is necessary to check regularly that the entire air path is sealed.
2. The gas source part of the cutting machine should be kept away from the open flame, and place normal carbon dioxide or other appropriate fire extinguishing devices near it.
3. Operators should timely control the fire when it is adjusted to avoid fire.
First, to prevent electric shock 1. When the power or the machine is running, please do not touch the electrical cabinet and any electrical components within the console.
2. Do not operate any switch knob with wet hands to prevent electric shock.
3. It is strictly forbidden to check the line or replace the electric element with electricity. 2. To prevent damage 1. When the cutting machine is running, pay attention to whether there are people or other objects in front, so as to avoid injury.
2. After each cutting is completed, the torch should be raised to a higher position so as not to hit the steel plate and damage the cutting torch.
3. Mechanical maintenance personnel should ensure that the machine is at a standstill during maintenance. And hang up warning signs to prevent the sudden operation of the machine and human accidents.
Third, to prevent fires 1. Cutting machine use of raw materials for flammable gases such as acetylene, propane, liquefied gas and so on. It is necessary to check regularly that the entire air path is sealed.
2. The gas source part of the cutting machine should be kept away from the open flame, and place normal carbon dioxide or other appropriate fire extinguishing devices near it.
3. Operators should timely control the fire when it is adjusted to avoid fire.
The screw rod is a machine screw (mechanical screw), which is the kind of flat head at the front end. The screw pitch is small and uniform. It is generally used to fasten metal and machine parts.
Machine silk:
Round head machine tooth screw PM
Round head screw with intermedia
Large flat head screw TM
Countersunk screw km
Half countersunk head machine tooth screw OM
Big head screw BM
Thin head machine tooth screw cm
Cup head machine tooth Bolt HM
Machine Screws,Sewing Machine Screws,Slotted Cheese Head Screws,Fillister Head Machine Screw
Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com